MSMCGLCE20AE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS diodes are a type of semiconductor device used to protect circuits from overvoltage transients such as electrostatic discharge (ESD) and lightning-induced surges. They are sometimes referred to as transient voltage suppressor diodes. MSMCGLCE20AE3 is a 3-pin surface mountable TVS diode and it is widely used in military, aerospace, telecom and datacom equipment for protecting sensitive circuits from overvoltage transients.

Characteristics of MSMCGLCE20AE3

MSMCGLCE20AE3 provides high surge protection for up to 40A peak current with 8/20 usec waveform. It has an ultra-low working voltage of 8.0V and a low stand-off voltage of only 6.2V. It also has fast response time with a maximum clamping voltage of 14.6V. In addition, it has reverse leakage of 100uA max @ 8V.

Applications of MSMCGLCE20AE3

MSMCGLCE20AE3 is used for both overvoltage protection and ESD suppression, in applications such as automotive, telecom, datacom, industrial, networking, and medical equipment. It can be used to protect sensitive circuits from high-voltage spikes and transients. Some of the common applications of MSMCGLCE20AE3 include protection of USB ports, audio/video equipment, computers, automotive sensors, etc.

Working Principle of MSMCGLCE20AE3

The working principle of MSMCGLCE20AE3 is the same as any other TVS diode. It consists of a diode connected to an external resistor. When a voltage transient is applied to the anode, the diode conducts current, which is limited by the external resistor. This reduces the voltage applied to the protected device, thus preventing damage due to overvoltage transients. The diode then switches off when the transient has passed, allowing the normal operating voltage to be applied.

Additionally, the diode also acts as an ESD suppressor by clamping the voltage spikes to a certain level. The clamping voltage is determined by the doping profile of the diode and the external series resistor. When an ESD pulse is applied to the diode, the current is limited by the resistor, thus reducing the clamping voltage.

In summary, MSMCGLCE20AE3 is a 3-pin surface mountable TVS diode, which provides up to 40A peak current surge protection with an ultra-low working voltage of 8.0V and a low stand-off voltage of 6.2V. It is used to protect sensitive circuits from high-voltage transients and spikes, with applications including automotive, telecom, datacom, industrial, networking, and medical equipment. The working principle of MSMCGLCE20AE3 is the same as any other TVS diode, where it consists of a diode connected to an external resistor, and the diode clamps the voltage spikes to a certain level.

The specific data is subject to PDF, and the above content is for reference