MSMCJ20A/TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes
TVS diodes, the abbreviation of Transient Voltage Suppressor diodes, is a kind of semiconductor device for protection against high transient voltage surges. They are a fast, low power, robust dynamical device used to protect many electrical components. The MSCJ20A/TR applicable field and working principle will be discussed in detail below.

The MSCJ20A/TR is a bi-directional TVS device designed to protect two lines from ESD (electrostatic discharge) and EFT (electrical fast transient) pulses for automotive, communication, and consumer electrical and electronical systems. It is extremely important that these networks and systems should be working at an optimal performance level and should not be affected by external high over-voltage transient energies that can disrupt or destroy the system.
The MSCJ20A/TR is designed to interrupt and siphon off high voltage and over-voltages to keep the internal circuit from an interruption. The device can be used to protect sensitive components from environment and EMI (electromagnetic interference) induced transients, overvoltages, electrostatic discharges, and electrical fast transients. They provide a unidirectional and even bidirectional protection, depending on the device type and polarity.

At normal operation, the PDN (power distribution network) of the protection device will be a low-impedance path. When a high-energy transient over-threshold voltage occurs, the TVS will be forward-biased, clamping the voltage and disconnecting the load. The TVS can be either fully burned out (which is not recoverable) or collapsed (in which case the device can recover after turning off the clamping voltage).
The MSCJ20A/TR device is designed for a low and nominal reverse standoff voltage (Nom RBS). Its clamping voltage (Vc) is very low, while the peak pulse power (PPP) is remarkably high. Its high-damping characteristics ensure that the clamp voltage rise time is fast during a rise time of transients such as EFT. It can operate under continuous working voltage (Vwv) using a typical capacitive discharge of less than 1V.

In addition, The MSCJ20A/TR a high ESD resistance to protect against ESD shock in which a momentary high voltage shocks occur. The device is designed in such a way that it limits the amount of surge current to a safe level, preventing damage to sensitive components and circuits. The device can operate in all weather conditions. This is ensuring reliable operation even under extreme weather conditions such as rain, snow, and freezing temperatures.

In short, the MSCJ20A/TR TVS diode is a robust and efficient protection device that is used to protect sensitive components and circuits against EFTs, ESD reaches, and transients. It is designed with a low reverse stand-off voltage, a high peak power handling capacity, and very fast clamping voltage rise time. It can be used to protect the power distribution network against a variety of overvoltages and excessive discharge current.

The specific data is subject to PDF, and the above content is for reference