MSRT200160(A)

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	1600V
Current - Average Rectified (Io) (per Diode):	200A (DC)
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 200A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr:	10µA @ 600V
Mounting Type:	Chassis Mount
Package / Case:	Three Tower
Supplier Device Package:	Three Tower

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MSRT200160(A) Application Field and Working Principle

MSRT200160(A) diodes are used in various electrical and electronic systems in various industries, including power, solar, LED, and telecommunications. They are usually connected in series or parallel arrays.The MSRT200160(A) diode is a unidirectional voltage-controlled silicon rectifier, designed to operate in an environment of DC voltage. It is designed for a maximum operating temperature of 130℃ and a maximum forward surge current capacity of 8A. The operating forward voltage of the diode is generally between 1V and 1. 5V. The turn-on threshold voltage of the diode is 0. 5V.The MSRT200160(A) rectifier array consists of two diodes connected in one of two common configurations - series or parallel. The configuration of the array is determined by the current flow requirement of the system.When the diodes are combined in series, one diode conducts the current in one direction, while the other diode conducts the current in the opposite direction. This results in a higher voltage drop across the series.When the diodes are connected in parallel, both diodes allow current to flow in both directions. The total forward voltage drop across the array will be less than that of the series configuration. In this configuration, the diodes either share the load or current between them, reducing the forward voltage drop that would normally be experienced across two separate diodes.The MSRT200160(A) can also be used in a device called a full-wave voltage doubler, where it is combined with four diodes in a bridge configuration. This device is used to create a high voltage DC source from a lower voltage AC source.In addition to its rectifier and doubles functions, the MSRT200160(A) can also be used in snubbing applications. Snubbers are used to provide a controlled resistance across a circuit to reduce overvoltage and/or current transients.The MSRT200160(A) diode is designed to provide reliable, low-cost switching between AC and DC power sources. The diode is ideal for use in applications such as rectifiers and voltage controllers. Its low forward voltage drop, high surge current capacity, and temperature range make it well-suited for a variety of power supply designs and applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description