MSRT20060(A)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MSRT20060(A) is a diode array rectifier that belongs to the diode rectifier family. It is a high-current, low-voltage, single-phase, monolithic array rectifier module. A rectifier is an electrical device that converts alternating current (AC) to direct current (DC).

The MSRT20060(A) is a standard filled-array rectifier module which has a very small form factor of just two-inches by two-inches by four-inches. It is designed to provide superior heat dissipation, reliability, and cost-efficiency. The rectifier module consists of two rectifier dies, each with six diodes. The MSRT20060(A) is manufactured using blocking voltages range of 600V to 1000V.

The MSRT20060(A) has an operating temperature range of -40°C to +150°C, with a junction temperature of 150°C, and a maximum power dissipation of 11W. Its average forward current is 60A, and its forward voltage drop is 2V. Its reverse current leakage is 2.2mA at 600V and 2.6mA at 1000V.

The MSRT20060(A) is ideal for switch-mode power supply (SMPS) applications which require low-loss, low-noise, and fast-pulsing performance. It is also suitable for various applications in power supplies, solar power systems, battery charging systems, motor drives, and lighting. The rectifier has a high surge capability, allowing it to survive short-term overloads.

The working principle of MSRT20060(A) is straightforward. AC current from a power source is connected to the rectifier\'s two terminals. The diode array contains several individual diodes which act as rectifying elements. When a voltage is applied across the terminals, the diodes will conduct electricity, allowing current to flow through the device in only one direction. This rectified current, which is now DC, can be used for various electronic operations.

In summary, the MSRT20060(A) is an array rectifier module that belongs to the diode rectifier family. It is a two-inch by two-inch by four-inch module and it is ideal for SMPS applications. It has an operating temperature range of -40°C to +150°C and maximum power dissipation of 11W. The working principle of the MSRT20060(A) is that AC current is converted to DC current by the diode array in the device.

The specific data is subject to PDF, and the above content is for reference