MT40C16T1-BP Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MT40C16T1-BP is a high power silicon controlled rectifier (SCR) module with press-pack package. It is most commonly used in the industrial control and automation sectors due to its versatility and cost-effectiveness. The primary purpose of an SCR is to control the flow of electricity in an alternating current (AC) circuit by triggering the on/off state of the switches on the device. The device also has reverse conducting characteristics and can be used to protect the circuit from overload.

The MT40C16T1-BP is a semiconductor device with four leads: Anode (A), Gate (G), Cathode (K) and Mounting (M). In the on-state, the device turns on and acts like a short-circuit; allowing electricity to flow freely through the circuit. When the gate voltage is reduced, the SCR turns off, preventing electricity from flowing.

The MT40C16T1-BP has many applications. It can be used for motor control, over-voltage protection, switching on/off of various loads, voltage regulation, starting and reversing of motors, rectification in electronic circuits, and induction heating. The device has 2.2kV surge voltage withstand capability, up to 200A current capability, and VBO of 5V which makes it suitable for low voltage control applications.

In terms of its working principle, the MT40C16T1-BP works in three stages – forward blocking, forward conduction and reverse conduction. In the forward blocking state, the anode voltage is below the gate voltage and the SCR remains in its off-state, blocking the current flow through the device. In the forward conduction state, the anode voltage becomes higher than the gate voltage, triggering an avalanche action in the device’s junction and turning the SCR on. The gate signal then pierces through the forward electric field of the SCR. Finally, in the reverse conduction state, the cathode voltage becomes higher than the gate voltage, turning the device off.

The MT40C16T1-BP is one of the most versatile and cost-effective procedures for controlling the flow of electricity in an AC circuit. With its surge voltage withstand capability, current capability and VBO, it can be used for various applications such as motor control, over-voltage protection, switching on/off of various loads and induction heating.

The specific data is subject to PDF, and the above content is for reference