MURF860G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are fundamental components in most electronic devices, and are the building blocks of rectifiers, which are used to either convert alternating current to direct current (AC-DC) or reverse current (DC-AC). Single rectifiers are composed of a single diode and are used for smaller, simpler applications such as power taps or in junction boxes. The MURF860G is a single rectifier from ON Semiconductor and is a prime example of these components. In this article, we will discuss the applications and working principle of the MURF860G.

MURF860G Applications

The MURF860G is a single rectifier with a reverse voltage of 600V and a forward current of 8A. This makes it suitable for applications that require bidirectional rectification, such as in charge pump circuits, diode bridge rectifiers and other small power converters. The device is also well-suited for light-load applications such as micro-controllers, signal isolators and logic circuits, as the high-frequency operation of single rectifiers requires minimal power.

MURF860G Working Principle

The MURF860G is a single rectifier that works by allowing only one voltage polarity to pass through it. This works by having the diode configured in a reverse bias configuration, with an anode and cathode pointing in opposite directions. This setup allows current to flow only in one direction, allowing for electrical isolation between two components. When AC voltage is applied through the diode, the reverse-biased cathode suppresses the current flow. This allows the current to pass through only when the voltage of the anode is greater than that of the cathode.

In terms of power conversion, this process can be used to rectify AC current into DC current. The alternating current will be blocked by the reverse-biased cathode and only the positive cycles of the AC voltage will be allowed to pass. This will effectively convert AC into DC and allow for further manipulation of the current as desired.

Conclusion

The MURF860G is a single rectifier from ON Semiconductor that is specifically designed for power conversion and bidirectional rectification applications. The device features a reverse voltage of 600V and a forward current of 8A, making it suitable for low-power and light-load applications. The single rectifier has a unique working principle of selectively allowing only positive cycles of AC voltage to pass, effectively rectifying AC current into DC current.

The specific data is subject to PDF, and the above content is for reference