Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are a form of electrical circuit where current is converted from one DC voltage to another. DC-DC converters are typically used in many industries, including telecommunications, renewable energy, automotive and military applications. The most common types of DC-DC converter include buck converters, boost converters, and buck-boost converters. The type of converter chosen depends on the application and the voltage and current requirements.

MV036T045M027 Application Field and Working Principle

The MV036T045M027 is a type of DC-DC converter employed in telecommunications and military applications. It provides reliable, efficient conversion of low voltage DC into high voltage DC power. The high voltage output of the MV036T045M027 is 10,000 volts DC, with an output power of 20,000 watts. The maximum input voltage is 175V and the minimum input voltage is 16V. The MV036T045M027 has a high power factor of 0.95. It is designed with built-in protection features such as short-circuit and over-temperature protection.

The MV036T045M027 is a multi-staged flyback DC-DC converter which operates in two distinct modes. In the standby mode, the output voltage is equal to the input voltage and the converter does not operate. This allows the converter to remain in a low power state, which is ideal for low power applications. In the active mode, the output voltage is higher than the input voltage and the converter operates. The output voltage is increased through the use of transistors, diodes and inductors.

The operation of the MV036T045M027 begins with an input signal being applied. This input signal charges up a storage capacitor. When the input signal is removed and the storage capacitor is discharged, a current flow (current source) is created from the load to the storage capacitor. This current flow forces the voltage across the switching transistors to be inversely proportional to the voltage across the storage capacitor. As the voltage across the storage capacitor increases, the voltage across the switching transistors decreases, and vice versa.

The changing voltage across the switching transistors causes a current to be induced into the primary winding of the transformer. This current passes through the primary winding and creates a magnetic field. The secondary winding of the transformer is then magnetically coupled to the primary winding and a voltage is induced in the secondary winding. This voltage, which is higher than the input voltage, is then applied to the output circuit.

The MV036T045M027 is designed for high efficiency and low power consumption. It can be used to power high-voltage loads, such as telecom towers, lasers and medical equipment. It is also suitable for applications with high current requirements, such as wind turbines and solar inverters. Moreover, it is designed with advanced safety features to protect the circuit from damage in the event of overloads and surge voltages.

The specific data is subject to PDF, and the above content is for reference