MX7828LCWI+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC) are a powerful tool for transforming continuous analog data into discrete digital data that can be more easily manipulated and analyzed. The MX7828LCWI+T is a high-performance, 8-bit, monolithic, multi-channel low-power analog-to-digital converter (ADC) that is especially suitable for use in applications ranging from the most sophisticated laboratory measurements to simple, low-cost sensor networks.

The MX7828LCWI+T has an 8-channel input for various analog signals, including voltage, temperature and flow, and converts them into digital values with a resolution of 0.5LSB or better. The conversion speed of the device is up to 1MSPS and the conversion time is specified at 5μs. The MX7828LCWI+T supports a wide range of input sources, including 2.5 V to 5.5 V and 5 V to 25 V, and has an adjustable gain, offset and linear range. In addition to its low power use, the device has several features designed to reduce total system power consumption, such as a low-power standby mode, internal clock control and power-save mode.

The MX7828LCWI+T\'s integrated programmable analog-to-digital converter (A/D), high-speed serial interface, and sample/hold circuitry, make it ideal for a wide variety of applications requiring high-performance and high-resolution data conversion from Fahrenheit to Celsius and other temperature scales. The two general uses for the MX7828LCWI+T are for operation as either a stand-alone device or as part of an integrated system. Stand-alone operation of the MX7828LCWI+T requires only the MX7828LCWI+T itself and a reference voltage source. A reference voltage is necessary to set the proper conversion range to accept the analog signal inputs. A voltage reference such as the one on the MX7828LCWI+T connector will also provide power to the A/D board, as well as the necessary reference voltage.

Integrated systems take advantage of the MX7828LCWI+T\'s multiplexcoupled serial interface, its high speed operation, and its direct access to serial or parallel digital data. These features enable a number of applications such as in intelligent positioning systems and robotics, smart manufacturing systems, building automation, data acquision and sensing applications, etc. By interfacing the MX7828LCWI+T to additional peripheral circuits and components, such as a memory device or microcontroller, powerful intelligent applications can be created.

The MX7828LCWI+T\'s working principle is based upon the process of analog to digital conversion. In this process, analog signals from sensors and other sources are converted into digital values. Data is converted from one form to the other through the use of an electronic circuit which acts as an analog-to-digital converter which, in this case, is the MX7828LCWI+T. The A/D converter is designed to perform the conversion process as fast and accurately as possible, allowing it to be used in a variety of signal input scenarios.

The MX7828LCWI+T is a versatile, high performance, low power, monolithic ADC. It features 8 analog signal inputs, a wide range of voltage sources, multiplexed serial and parallel interfaces, and a built-in programmable gain and adjustable range. These features make the MX7828LCWI+T an ideal choice for a wide range of data acquisition and sensing applications, including robotics, smart manufacturing, building automation, and data acquisition.

The specific data is subject to PDF, and the above content is for reference