MXPLAD18KP58AE3

TVS - Diodes

Transient Voltage Suppressors (TVS) are semiconductor devices which are designed for protection against electrostatic discharge (ESD). They are also referred to as transient voltage suppressors, transient voltage spikes, transient voltage clampers, or transil diodes. They are normally integrated as part of a larger circuit for protection against over-voltage and electrostatic discharge (ESD).

The MXPLAD18KP58AE3 is a field-proven Shunt TVS diode specifically designed to protect sensitive electronic equipment from damage due to Electro-static Discharge (ESD). This TVS diode has a working voltage of 18 KV, a working current of 1.5A, and a peak pulse current (IPPM) of 27 A. It is an ultra-low capacitance diode that offers fast response times, and high ESD protection levels for electronic devices.

Application Field

The application field of the MXPLAD18KP58AE3 is very broad. It can be used to protect a variety of electronic devices and systems, such as: computer systems, communication systems, consumer electronics, and industrial applications. It is also suitable for ESD sensitive components, such as programmable logic controllers (PLCs), field-programmable gate arrays (FPGAs), and MEMS sensors.

Working Principle

The MXPLAD18KP58AE3 is based on the principle of a Shunt TVS diode. When an ESD event occurs, the diode will clamp the voltage to prevent damage to the attached sensitive electronic equipment. This is achieved by the diode’s capacity to absorb a large amount of energy and then dissipate it safely in a short period of time. The diode can handle the peak current associated with electrostatic discharges (ESD) due to its rapid current surge capabilities and ultra-low capacitance.

The diode’s current-handling capability is significantly higher than conventional diodes. This is because the rapid response time, and ultra-low capacitance allows for improved ESD protection. The diode also features a low-resistance flat enablement structure for higher current carrying capacity. This provides for less heat generated and improved power dissipation efficiency.

The MXPLAD18KP58AE3 is easy to integrate into existing circuits, as it requires minimal space and no external components. This makes it a versatile and cost-efficient solution for ESD and over-voltage protection.