MXPLAD7.5KP45CA Circuit Protection

MXPLAD7.5KP45CA is a TVS - Diode, which is a quick response device designed to protect against transient voltage threats such as electrical fast transients (EFT) and surge events which include lightning strike.

In an electrical circuit, the purpose of such a device is to protect sensitive components like integrated circuits and electrical systems from damage due to unexpected high surges or voltage spikes. It can act as both an overvoltage protector and a surge protector.

A TVS diode typically consists of a metal oxide varistor (MOV), a Zener diode, a Sparkgap diode, and a transient voltage suppressor (TVS) diode. The MOV acts to clamp voltage to a preset level, whereas the Zener diode protection temporarily holds the voltage to the Zener voltage level. The Sparkgap diode prevents further voltage increase, while the TVS diode absorbs excessive voltage.

The MXPLAD7.5KP45CA is a 7.5kW unidirectional TVS diode with stand-off voltage of 45V. It is a leadless device with a small footprint that can be used in many applications demanding transient voltage suppression.

The MXPLAD7.5KP45CA is designed to protect sensitive electronic components from over-voltage transients such as those caused by lightning strikes, electrostatic discharge, load dump and inductive kickback. It helps to keep the supply voltage within safe levels of operation when such transients occur.

It is particularly suitable for applications in consumer electronics, computers, telecommunications, industrial electronics and appliances, automotive and other exposed environments. It has a wide range of operating temperatures from -55°C to 150°C and a high surge capability up to 6000 watts peak.

The MXPLAD7.5KP45CA works by dissipating the excess voltage that comes from the transient source. It has ESD protection ratings up to +/- 8 kV contact discharge and +/- 15 kV air-gap discharge, providing the necessary protection for your device or system against ESD events.

The fast response time, low clamping voltage, and high surge capability make the MXPLAD7.5KP45CA a suitable choice for protecting sensitive components from voltage spikes and transients. Its compact and lightweight design makes it easier to install into circuit boards that have limited space. The device is RoHS compliant and is 100% burn-in tested for reliability and performance.