NCP303LSN27T1 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NCP303LSN27T1 is a device belonging to the family of Power Management IC (PMIC) - Supervisors. This device is specified for low voltage, low power applications and allows the designer to monitor the status condition, detect faults and take corrective action.

This supervisor is provided with two open-drain reset outputs. These outputs are capacitive-coupled and active-low. These reset outputs control the system in case of a fault condition or when the monitored voltage falls below the specified level.

The NCP303LSN27T1 consists of a low-power CMOS low-power start-up voltage detector and three comparators, which together provide a reset signal when the voltage reaches below a certain threshold. The device also has an internal bandgap reference, enabling more precise and stable monitoring of various power supplies than its analog counterpart. It also features a watchdog timer, Thermal Shut Down (TSD) and Programmable End-of-Life (PEL).

The device provides the capability to monitor multiple rails simultaneously, including both power supply rails and ground. It is configured to provide a reset output in case of a voltage fall or an over- or under-voltage condition. Additionally, the device provides fault detection, reset and shut-down capability of the system when an over- or under-voltage condition is detected.

The NCP303LSN27T1 is widely used in various systems including automotive, industrial, audio and consumer applications. It can also be used in battery-powered systems. The device is designed to provide system reset and power shut-down in case of excessive power supply voltage drop or other related faults. Moreover, its high impedance and low power consumption make it ideal for low voltage, low power applications.

The application field for the NCP303LSN27T1 is embedded systems, computer power supplies, gaming systems and other similar applications. Furthermore, it is also widely used in telecom systems and embedded appliances.

The working principle of the NCP303LSN27T1 is based on a low-power start-up identical voltage detector and three comparators. The device is configured to provide a reset output when the monitored voltage falls below a certain threshold. This reset output can then be used to control the system for providing the power reset and shutdown. Additionally, the device features a watchdog timer, Thermal Shut Down (TSD) and Programmable End-of-Life (PEL) in order to detect any faults and provide a reset output.

The specific data is subject to PDF, and the above content is for reference