NCP4623HSN100T1G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NCP4623HSN100T1G is a voltage regulator (VR) which helps manage the power distribution within a system. It is a linear voltage regulator, which belongs to the power management integrated circuit (PMIC) family and helps in increasing efficiency and reducing overall system cost. The NCP4623HSN100T1G works by controlling an output load to hold the output voltage close to a reference voltage, known as the “set point.” This achieves a regulated output voltage in spite of any changes in the input voltage.

The NCP4623HSN100T1G is a low-power, low-dropout (LDO) linear regulator that offers a wide range of features, including dropout voltages as low as 40 mV and a programmable output voltage range of 1.2V to 5.5V. The output current can be up to 100 mA and all functions are controlled by one enable/disable pin. It has good thermal performance as it is capable of sinking up to 375 mW in a very compact package.

The NCP4623HSN100T1G is suitable for a wide range of applications, including automotive, consumer electronics, smart homes and medical devices. In medical devices, it can help in achieving the high output voltage regressions that are required in such applications, while still maintaining low power consumption. In consumer electronics, it can provide a reliable source of power, while still consuming low power. In smart home devices, the NCP4623HSN100T1G can help in power management, by providing the correct amount of power needed, in order to achieve maximum efficiency. In automotive applications, it can help in providing a regulated output voltage for the systems and sensors in the car, such as the airbag system and fuel level sensors, as well as any other sensors that may need a specific output voltage.

The working principle of the NCP4623HSN100T1G is relatively simple. It converts the input voltage from a higher voltage to a lower voltage, while still providing the same amount of current. This is done by using a pass element, such as a transistor or diode, which is connected in series with the output. The pass element is connected to an adjustable voltage reference, which is connected to ground in order to create a virtual ground. The output voltage is adjusted by controlling the voltage across the pass element via the voltage reference, while the current is determined by the size of the pass element.

The pass element acts as a switch, allowing current to flow when its voltage is higher than the output voltage, also known as the “dropout voltage”. When the dropout voltage is reached, the transistor or diode cuts off the current, stopping it from flowing through the pass element. This is known as the “regulator action” and is the way that the NCP4623HSN100T1G maintains a constant output voltage, despite changes in the input voltage.

In summary, the NCP4623HSN100T1G is a linear voltage regulator belonging to the PMIC family that provides a steady and reliable output voltage for a wide range of applications. It has a programmable output voltage range of 1.2V to 5.5V and a maximum output current of 100 mA. It is suitable for medical, consumer electronics, automotive and smart home applications. Its working principle is relatively simple; it uses a pass element to convert a higher voltage to a lower voltage, while still providing the same amount of current. This is done by controlling the voltage across the pass element via a voltage reference, while the current is determined by the size of the pass element.

The specific data is subject to PDF, and the above content is for reference