Allicdata Part #: | NCV2250SQ2T2G-ND |
Manufacturer Part#: |
NCV2250SQ2T2G |
Price: | $ 0.18 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ON Semiconductor |
Short Description: | SINGLE PUSH-PULL OUTPUT C |
More Detail: | Magnitude Comparator Bit Output |
DataSheet: | NCV2250SQ2T2G Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.15712 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The or NCV2250SQ2T2G is a logic comparator that is optimized for low voltage operation. It has two input pins: a non-inverting and an inverting, and two output pins: a positive and a negative. The comparator features 2.3 V to 5.5 V overvoltage protection, 4.2 V to 11 V operating range, fast settling time, and rail-to-rail operation. It can be used in both low and high speed applications with outstanding performance.
An important feature of the NCV2250 is its low input current. The input bias current is typically less than 30 nA and is stable over the full operating range. This allows it to perform well in battery powered applications with minimum power consumption. The comparator is also very versatile as it can be used in low voltage, low current, and low power operation mode.
When the non-inverting input is higher than the inverting input, the positive output is active and the negative output is inactive. In the reverse case, the positive output is inactive and the negative output active which makes the comparator offers a hysteresis. In the event the two inputs are equal, the output pins are ‘floating’, i.e. not driven to a predetermined logic state.
In addition to its two output pins, the NCV2250 has an open-drain enable pin that can be used to enable or disable the outputs. This pin can also be used to activate one of the outputs. When the enable pin is chained to one of the inputs, it is possible to force the state of the comparator simply by driving the enable pin with a logic-level signal.
The NCV2250 is mainly used in power management, microcontroller applications, industrial process control, digital RF communication systems, and medical applications. In power management applications, it is used to protect batteries from overvoltage. It can detect when voltage reaches a programmed threshold and disconnect the battery to prevent damage due to cell reversal or overcharging. In microcontroller applications, the comparator can be used to detect voltage levels for reset or for the wake-up of low power mode. It can also be used to guard against battery-operated device failure or to detect an overvoltage condition.
The device is also used in industrial process control applications. It can be employed to monitor level sensing in tanks and other containers. It is also used to detect when pressure levels are exceeded in pumps and other pieces of equipment. It is also used in RF communication systems such as radio frequency identification (RFID) for detecting the presence of a tag in the vicinity of a reader.
In medical applications, the comparator is used to detect patient body temperature. It can also be used to detect presence or absence of an electrical signal which can be used to detect breathing or other body functions. In addition, it can be used to monitor levels of certain drugs in the body.
The NCV2250 is an ideal device for low voltage, low power applications as it offers superior performance in terms of low input current and power. It is also very versatile and can be used in a variety of applications ranging from power management to industrial process control. In addition, it can also be used in medical applications such as patient monitoring.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
NCV2903DMR2G | ON Semicondu... | -- | 1000 | IC COMP DUAL OFFSET LV 8M... |
NCV2903DR2G | ON Semicondu... | 0.15 $ | 1000 | IC COMP DUAL OFFSET LV 8S... |
NCV2901DR2G | ON Semicondu... | 0.15 $ | 1000 | IC COMP QUAD SGL SUPPLY 1... |
NCV2393DR2G | ON Semicondu... | 0.21 $ | 1000 | IC COMPARATOR 16V DUAL 8S... |
NCV2200SN2T1G | ON Semicondu... | 0.28 $ | 1000 | IC COMPARATOR COMPL SOT-2... |
NCV2200SQ2T2G | ON Semicondu... | 0.22 $ | 3000 | IC COMPARATOR COMPL SC70-... |
NCV2202SN2T1G | ON Semicondu... | 0.25 $ | 1000 | IC COMPARATOR SGL CMOS SO... |
NCV2211DR2G | ON Semicondu... | 0.19 $ | 1000 | IC AUDIO POWER AMP DIFF 8... |
NCV2820MUTBG | ON Semicondu... | -- | 1000 | IC AUDIO PWR AMP CLASS D ... |
NCV2252SN2T1G | ON Semicondu... | 0.18 $ | 1000 | SINGLE OPEN DRAIN OUTPUTC... |
NCV2252SQ2T2G | ON Semicondu... | 0.18 $ | 1000 | SINGLE OPEN DRAIN OUTPUTC... |
NCV2200AMUTBG | ON Semicondu... | 0.21 $ | 1000 | ANA COMPARATOR UDFN6Compa... |
NCV2200SN1T1G | ON Semicondu... | 0.34 $ | 1000 | IC COMPARATOR COMPL SOT-2... |
NCV2903VDR2G | ON Semicondu... | 0.0 $ | 1000 | IC COMP DUAL OFFSET LV 8S... |
NCV20061SN2T1G | ON Semicondu... | 0.16 $ | 1000 | IC OP AMP RRIO 3MHZ 5TSOP... |
NCV20081SN2T1G | ON Semicondu... | 0.16 $ | 1000 | IC OP AMP RRIO SGL 5TSOPG... |
NCV20091SN2T1G | ON Semicondu... | 0.16 $ | 1000 | IC OP AMP RRIO SGL 5TSOPG... |
NCV20062DTBR2G | ON Semicondu... | -- | 1000 | IC OP AMP RRIO DUAL 8TSSO... |
NCV20082DR2G | ON Semicondu... | 0.25 $ | 1000 | IC OP AMP RRIO DUAL 8SOIC... |
NCV20082DTBR2G | ON Semicondu... | 0.25 $ | 1000 | IC OP AMP RRIO DUAL 8TSSO... |
NCV20092DR2G | ON Semicondu... | 0.25 $ | 1000 | IC OP AMP RRIO DUAL 8SOIC... |
NCV20092DTBR2G | ON Semicondu... | 0.25 $ | 1000 | IC OP AMP RRIO DUAL 8TSSO... |
NCV20082DMR2G | ON Semicondu... | -- | 1000 | IC OP AMP RRIO DUAL MICRO... |
NCV20092DMR2G | ON Semicondu... | -- | 1000 | IC OP AMP RRIO DUAL MICRO... |
NCV210RSQT2G | ON Semicondu... | 0.25 $ | 1000 | CURRENT SENSE AMP G=200Am... |
NCV213RSQT2G | ON Semicondu... | 0.25 $ | 1000 | CURRENT SENSE AMP G=500Am... |
NCV214RSQT2G | ON Semicondu... | 0.25 $ | 1000 | CURRENT SENSE AMP G=100Am... |
NCV2002SN1T1G | ON Semicondu... | 0.27 $ | 1000 | IC OP AMP GP 900KHZ RR 6T... |
NCV20072DTBR2G | ON Semicondu... | 0.27 $ | 1000 | IC OP AMP RRO DUAL 8TSSOP... |
NCV20032DR2G | ON Semicondu... | 0.29 $ | 1000 | IC OP AMP RR 7MHZ 8SOICGe... |
NCV20032DMR2G | ON Semicondu... | 0.34 $ | 1000 | IC OP AMP RR 7MHZ MICRO-8... |
NCV20032DTBR2G | ON Semicondu... | 0.34 $ | 1000 | IC OP AMP RR 7MHZ TSSOP-8... |
NCV2333DR2G | ON Semicondu... | 0.34 $ | 1000 | IC OP AMP PREC DUAL 8SOIC... |
NCV2904VDR2G | ON Semicondu... | -- | 1000 | IC OPAMP GP 1MHZ 8SOICGen... |
NCV2904DR2G | ON Semicondu... | -- | 7500 | IC OPAMP GP 1MHZ 8SOICGen... |
NCV2902DTBR2G | ON Semicondu... | -- | 68 | IC OPAMP GP 1MHZ 14TSSOPG... |
NCV2003SN2T1G | ON Semicondu... | -- | 3000 | IC OPAMP GP 7MHZ RR 5SOT2... |
NCV2574DW-ADJR2G | ON Semicondu... | 0.98 $ | 1000 | IC REG MULT CONFG INV ADJ... |
NCV2575D2T-12R4G | ON Semicondu... | 0.95 $ | 1000 | IC REG MULT CONFIG INV 12... |
NCV2931AD-5.0R2 | ON Semicondu... | -- | 1000 | IC REG LINEAR 5V 100MA 8S... |
IC COMPARATOR MAGNITUDE 28PLCCMagnitude ...
IC COMPARATOR IDENTITY 8B 20SOPMagnitude...
IC COMPARATOR MAGNITUDE 4B 16DIPMagnitud...
IC COMPARATOR MAGNITUDE 16SOICMagnitude ...
IC COMPARATOR IDENTITY 8B 20DIPMagnitude...
IC COMPARATOR IDENTITY 8B 20SOICMagnitud...