NCV20092DMR2G

Current - Input Bias:	1pA
Supplier Device Package:	Micro8™
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	1.8 V ~ 5.5 V
Current - Output / Channel:	8.5mA
Current - Supply:	23µA
Voltage - Input Offset:	500µV
Series:	Automotive, AEC-Q100
Gain Bandwidth Product:	350kHz
Slew Rate:	0.17 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

The NCV20092DMR2G is an integrated, dual channel amplifier specifically designed for instrumentation. It provides very low offset voltage (<2mV) at the input stage and exceptionally low supply voltage range (3V to 12V). Furthermore, it features wide bandwidth (up to 110MHz) and fast settling time (50µs).The NCV20092DMR2G is a differential input amplifier and thus can be used in applications such as bridge sensing, strain gage sensing, level detection, motion detection, microprocessor interfacing and signal conditioning. Specifically, the NCV20092DMR2G can be used to measure and amplify signals in the range of microvolts.The NCV20092DMR2G amplifier is a two-stage design. The first stage of the amplifier consists of differential input stage, which uses an internally-generated common-mode voltage (Vcm) to set the operating point. The second stage uses an open loop, unity gain amplifier to amplify the signal. The input and the differential output voltage are both available.The NCV20092DMR2G is a low-noise amplifier with low total harmonic distortion. This makes it suitable for use in a wide range of applications where low power consumption and high performance are essential. The amplifier can be configured as a single-ended or differential amplifier and can be used in inverting and non-inverting configurations.The working principle of the NCV20092DMR2G is based on the principle of negative feedback. The amplifier amplifies the signal at its input and compares it to the reference voltage at its input. The difference between the two is amplified, and the amplified signal is used to adjust the amplifier’s output level. This behaves like a negative feedback loop, where the output voltage is adjusted until the difference between the input and output voltages is within a certain tolerance range.The NCV20092DMR2G has several features that make it an ideal choice for instrumentation applications. Its input stage features very low offset voltage (2mV) and wide input common-mode voltage range, both of which are important for signal stability. Additionally, the amplifier has a wide bandwidth (up to 110MHz) and fast settling time (50µs), as well as low total harmonic distortion of -0.5dB.In summary, the NCV20092DMR2G is a dual-channel amplifier designed for instrumentation applications. It features low offset voltage, wide input common-mode voltage range, wide bandwidth and fast settling time. In addition, it provides low noise and low total harmonic distortion, making it a suitable choice for measuring and amplifying signals in the range of microvolts.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description