NCV8623MN-30R2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

NCV8623MN-30R2G is an adjustable precision low-dropout (LDO) linear voltage regulator from ON Semiconductor which provides load current up to 200mA. Its adjustable output voltage range is between 1.2V to 30V. It is a voltage regulator in the PMIC (Power Management – Integrated Circuit) category. It is also a Linear Voltage Regulator, consisting of a regulated resistance which is developed to control the output voltage.

The NCV8623MN-30R2G is a Standard LDO regulator which uses a precision internally trimmed voltage reference and a high gain error amplifier along with an external resistor divider to control output voltage. It has an operating range of 1.2V to 30V with a minimum dropout voltage of 600mV when operating at 200mA. Its output voltage is programmed with a combination of resistor divider. It can also be used with fixed output voltage versions like 3.3V and 5V. It employs a CMOS output architecture and is available in SOT-23–5 package. The regulator has built-in thermal overload and short circuit current limiting protection. The NCV8623MN-30R2G is suitable for use in applications such as processor power supply, rail power manipulations, pc-cards, and LCD panel displays, among others.

The working principle for NCV8623MN-30R2G is quite straightforward. It requires an input voltage, a resistor divider to produce a reference voltage applied to the non-inverting input of the error amplifier. The output voltage is determined by the relative resistances of the divider. This provides a mechanism for voltage regulation. When the output voltage is greater than the reference voltage, the output should be pulled down to the reference voltage level. This is accomplished by internal current flowing from the output to the error amplifier. When the output voltage is lower than the reference voltage, current should be directed from the error amplifier to the output. This causes the output to increase.

The NCV8623MN-30R2G is a very efficient and one of the most sophisticated LDO regulators available in the market. It is suitable for providing high accuracy and current, low dropouts and good load and line regulation and can be used in any consumer electronics that require high accuracy and current control.

The specific data is subject to PDF, and the above content is for reference