NE1618DS,112

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Sensor Type:	Digital, Local/Remote
Sensing Temperature - Local:	0°C ~ 120°C
Sensing Temperature - Remote:	0°C ~ 120°C
Output Type:	SMBus
Voltage - Supply:	3 V ~ 3.6 V
Resolution:	8 b
Features:	One-Shot, Output Switch, Programmable Limit, Shutdown Mode, Standby Mode
Accuracy - Highest (Lowest):	±1.5°C (±3°C)
Test Condition:	60°C ~ 100°C (0°C ~ 120°C)
Operating Temperature:	0°C ~ 120°C
Mounting Type:	Surface Mount
Package / Case:	16-SSOP (0.154", 3.90mm Width)
Supplier Device Package:	16-SSOP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Temperature sensors are becoming increasingly important in many areas, as reliable and accurate temperature measurements are critical information in product manufacturing, research and development, and even in many residential and commercial areas. One of the temperature sensors that is available on the market today is the NE1618DS,112 temperature sensor, which has both analogue and digital output mechanics and is used widely in a variety of applications. This article will discuss the features of the NE1618DS,112 temperature sensor, its specific application field and its working principle.

Features of the NE1618DS,112 Temperature Sensor
The NE1618DS,112 temperature sensor is a two-output device that combines an analogue output with a digital output. It provides accurate temperature measurements and has a wide operating temperature range of -55 to +125 degrees Celsius, which makes it suitable for many applications requiring a general purpose temperature sensor. The NE1618DS,112 has a wide input voltage range of 0-20 V, allowing for greater control of the operating temperature, while also offering users a low power consumption of up to 0.1 mW, for extended life and installation costs. Additionally, it has a fast response time, allowing for accurate temperature readings in just a few milliseconds. The NE1618DS,112 also comes in a variety of package sizes and can support both a 5-pin and a 4-pin installation, depending on the desired application.

Application Fields of the NE1616DS,112 Temperature Sensor
The NE1618DS,112 temperature sensor is widely used in several applications due to its variety in installation options, accuracy and low power consumption. It is suitable for many consumer electronics applications, due to its low power consumption and long term reliability. Additionally, it can be used in medical devices such as thermometers and other monitoring systems, due to its high accuracy and quick response time. The NE1618DS,112 is also useful in the aerospace industry, as it offers temperature readings in extreme temperatures and it is very reliable in those conditions. In industrial applications, the NE1618DS,112 is widely used in motor control systems, process control systems, and temperature measuring systems.

Working Principle of the NE1618DS,112 Temperature Sensor
The NE1618DS,112 temperature sensor is a digital temperature sensor which operates based on the principle of thermistor. A thermistor is a semiconductor component whose resistance varies with temperature, and this resistance variation is used to determine the temperature. Upon detecting a temperature change, the thermistor will produce electrical signals which are then used to determine the temperature of the environment. The NE1618DS,112 temperature sensor uses an operative circuit to read and interpret these electrical signals produced by the thermistor, which results in a temperature reading that is accurate and reliable. This temperature reading can then be converted into digital values, using an analog-to-digital converter, which are then used to control and monitor the motor or other device in the application.

Conclusion
The NE1618DS,112 temperature sensor is a reliable temperature sensing component which has a variety of features and applications. It has both analogue and digital output, and it offers users accurate temperature readings in a very short time. It is widely used in consumer electronics, medical devices, aerospace, and industrial applications due to its low power consumption, accuracy and fast response time. Finally, the NE1618DS,112 operates based on the principle of thermistor, wherein a thermistor produces electrical signals that are used to determine the temperature, which is then converted into digital values using an analog-to-digital converter.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description