Allicdata Part #: | NF10AA0500MHB-ND |
Manufacturer Part#: |
NF10AA0500MHB |
Price: | $ 0.00 |
Product Category: | Circuit Protection |
Manufacturer: | AVX Corporation |
Short Description: | ICL 50 OHM 20% 1.4A 9.9MM |
More Detail: | Inrush Current Limiter 50 Ohms ±20% 1.4A 0.39" (9.... |
DataSheet: | NF10AA0500MHB Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Contains lead / RoHS non-compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | 0.00000 |
Series: | NF10 |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Obsolete |
Moisture Sensitivity Level (MSL): | -- |
R @ 25°C: | 50 Ohms |
Tolerance: | ±20% |
Current - Steady State Max: | 1.4A |
R @ Current: | 1.07 Ohms |
Diameter: | 0.39" (9.9mm) |
Lead Spacing: | 0.200" (5.08mm) |
Approvals: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Inrush Current Limiters (ICL)
Inrush Current Limiters (ICLs) are devices used to limit the surge of inrush current at start-up or turn-on of an electric circuit or system. Inrush currents occur when a capacitor is suddenly charged, which can damage electrical system components or create sparks that can ignite an explosive atmosphere. ICLs are essential for power factor correction, motor starting, and general system control and protection.
The NF10AA0500MHB Current Limiter was designed to limit high-power inrush currents in a wide range of applications. This device is a 1 pole, 1 switch Non-Isolated type, designed to limit inrush current and prevent damage by containing it to a level below the trip threshold.
The NF10AA0500MHB has a trip voltage rating of 105V and a max switch current of 5A. The device is capable of handling 8A of steady-state current, and features low power dissipation and a ripple-free current response. The trip current levels have been optimized to allow for a soft start and avoid voltage over-shoot and resonance during power-up.
The NF10AA0500MHB inrush current limiter works by analyzing the input voltage and then activating the inrush current limiter by connecting an external resistor. The NF10AA0500MHB can be connected in one of two ways – either parallel or Series – depending on the desired inrush current.
In the parallel connection, the NF10AA0500MHB works by connecting a resistor in parallel with the power circuit, which allows the inrush current to limit itself based on the size of the resistor. The NF10AA0500MHB will reduce the inrush current to the value set by the resistor. The Series connection works similarly to the parallel connection but with the resistor placed in series with the power circuit, allowing the current to pass through the resistor and be limited by its value.
The NF10AA0500MHB can be used in a wide variety of applications, including consumer electronics, industrial control systems, automotive power systems, and many others. It can be used to prevent damage to sensitive components, reduce power consumption, and reduce the risk of dangerous sparking. The unit is small, meaning it can be easily installed in tight places. Its low power dissipation and ripple-free response also ensure reliable performance and optimal system protection in high-power applications.
In conclusion, the NF10AA0500MHB Current Limiter is an effective and reliable solution for a variety of power protection applications. It is designed to limit inrush current, prevent damage, and minimize power consumption in a wide range of applications. The device is also small and can be easily installed in tight places. It can be connected in either parallel or series connection to provide optimal system protection for high-power applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
2M620MS064-NF10 | Amphenol Aer... | 0.0 $ | 1000 | CONN CABLE CLAMP SZ 10 12... |
2M620MS065-NF10 | Amphenol Aer... | 0.0 $ | 1000 | CONN CABLE CLAMP SZ 10 12... |
NF10AA0100M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 10 OHM 20% 2.8A 9.9MM... |
NF10AA0100MHB | AVX Corporat... | 0.0 $ | 1000 | ICL 10 OHM 20% 2.5A 9.9MM... |
NF10AA0121M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 120 OHM 20% 1.2A 9.9M... |
NF10AA0121MHB | AVX Corporat... | 0.0 $ | 1000 | ICL 120 OHM 20% 1A 9.9MMI... |
NF10AA0160M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 16 OHM 20% 2.3A 9.9MM... |
NF10AA0160MHB | AVX Corporat... | 0.0 $ | 1000 | ICL 16 OHM 20% 2A 9.9MMIn... |
NF10AA0200M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 20 OHM 20% 3.1A 9.9MM... |
NF10AA0250M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 25 OHM 20% 2A 9.9MMIn... |
NF10AA0250MHB | AVX Corporat... | 0.0 $ | 1000 | ICL 25 OHM 20% 1.7A 9.9MM... |
NF10AA0259M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 2.5 OHM 20% 5.2A 9.9M... |
NF10AA0259MHB | AVX Corporat... | 0.0 $ | 1000 | ICL 2.5 OHM 20% 4.5A 9.9M... |
NF10AA0409M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 4 OHM 20% 3.6A 9.9MMI... |
NF10AA0500M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 50 OHM 20% 1.6A 9.9MM... |
NF10AA0500MHB | AVX Corporat... | 0.0 $ | 1000 | ICL 50 OHM 20% 1.4A 9.9MM... |
NF10AA0509M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 5 OHM 20% 3.8A 9.9MMI... |
NF10AA0509MHB | AVX Corporat... | 0.0 $ | 1000 | ICL 5 OHM 20% 3.3A 9.9MMI... |
NF10AA0800M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 80 OHM 20% 1.3A 9.9MM... |
NF10AA0809M-- | AVX Corporat... | 0.0 $ | 1000 | ICL 8 OHM 20% 3A 9.9MMInr... |
NF1050510000G | Amphenol Any... | 1.92 $ | 1000 | TERM BLOCK PLUG 10/20POS ... |
NF1050520000G | Amphenol Any... | 1.99 $ | 1000 | TERM BLOCK PLUG 10/20POS ... |
NF1050500000G | Amphenol Any... | 1.84 $ | 1000 | TERM BLOCK PLUG 10/20POS ... |
ICL 1.3 OHM 25% 8A 13.97MMInrush Current...
ICL 10 OHM 20% 5A 12MMInrush Current Lim...
ICL 4 OHM 20% 23A 30MMInrush Current Lim...
ICL 16 OHM 20% 4A 22MMInrush Current Lim...
ICL 16 OHM 25% 4A 19.56MMInrush Current ...
ICL 33 OHM 20% 2.5A 15MMInrush Current L...