NIS5102QP1HT1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Hot Swap Controllers (NIS5102QP1HT1 application field and working principle) is a kind of power management and protection device, which enables safe power supply to sensitive systems. It limits the inrush current generated when the load is connected, and protects the circuit against overvoltage, overload, short-circuit and over-temperature. It can prevent the high inrush current exceeding the system’s current limit, and prevent any overvoltage conditions from damaging the system. It is widely used in communications systems, medical equipment, industrial control systems, automotive electronics, and other applications where uncontrolled overvoltage or current could damage the system.

The NIS5102QP1HT1 is a hot swap protection device designed for applications that require a source of power for circuit protection. It is a dual-channel hot swap controller designed for low-power applications. The device is based on a Hot-Swap concept which allows the device to control the power delivered to a load. The device uses a dual-channel hot-swap architecture to provide maximum system robustness, flexibility, and reliability.

The NIS5102QP1HT1 Hot Swap Controller is designed to protect the system from overvoltage, surge and over-current conditions. The device is optimized for rapid and reliable disconnect of the load under extreme overvoltage and over-current conditions by means of its advanced control circuitry. It also features a low-impedance discharge path, allowing for fast transient response and low parasitic inductance.

The device uses a dual-channel architecture to provide maximum system robustness, flexibility and reliability. Each channel is independently programmable and provides voltage and current protection. The device has an adjustable input voltage level range of 0.8 V to 4.6 V, an adjustable current limit range of 0.8 A to 4.3 A, and a maximum current rating of 6 A. It also has a temperature limit of up to 175°C. It also provides a low-impedance dynamic output discharge feature, which provides rapid discharge of the output voltage without the need for additional series resistors.

The device also incorporates an interrupt masking feature, which prevents the interrupts from being generated in response to spurious noise events or false triggering due to the input signal or low duty cycle signals. This prevents unnecessary system turn-off if a spurious signal is detected.

The device also features a cycle-by-cycle current-limit which ensures that in the event of an over-current condition, only that cycle is disconnected and the remaining portion of a cycle is still powered. This allows for a “soft” disconnection of the load in the event of an over-current. With this, the system is still able to resume normal operation after the over-current condition is resolved.

In addition, the device is designed to enable the system to recover quickly after the cycle-by-cycle current-limit is triggered, which allows the system to be up and running in the shortest amount of time. This is especially beneficial in applications that require fast reconnection of the load.

The NIS5102QP1HT1 Hot Swap Controller is a highly integrated protective device that is suitable for use in a wide range of applications requiring power sequencing, current limit and voltage protection. The device is designed to provide reliable operation and robustness in hot-swap applications, and is capable of protecting high current applications up to 6A.

The specific data is subject to PDF, and the above content is for reference