NTVB300SC-L Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, ors semiforever, are devices used to control the flow of electricity in a circuit – they are very similar to transistors but operate in an entirely different way. NTVB300SC-L is one of thyristors, it is a high-voltage semiconductor switch, designed to help protect against overvoltage transients.

The NTVB300SC-L is typically used in industrial, commercial and residential applications, such as lighting, HVAC, power supplies, transformers, and power systems. It offers a fast, reliable, low-cost solution for controlling voltage transients in electronic systems.

The NTVB300SC-L is an ideal device for providing circuit protection, as it has a wide voltage range, fast response time (tolerances range from 10 to 50 ns) and a low leakage current (typically 2 to 5 mA). The device is also relatively easy to configure, with adjustable turn-on and turn-off times and adjustable trip voltage.

The working principle of NTVB300SC-L is based on the "Thyristor" concept. In this type of device, a three-terminal device, the two main terminals (anode and cathode) have two further terminals, the gate terminal and the control electrode. The gate terminal is linked to the control electrode and acts as a switch, allowing the thyristor to be turned on and off.

When the voltage across the anode and cathode is below a certain level (the breakdown voltage), the thyristor remains off. However, when the voltage is greater than the breakdown voltage, current starts to flow through the device, and the thyristor is "on". The NTVB300SC-L has a breakdown voltage of 500 volts.

The NTVB300SC-L is normally "off"; it is turned "on" when a voltage greater than the breakdown voltage is applied across the anode and cathode. To turn the thyristor "off" again, an opposite voltage must be applied. As the NTVB300SC-L is a three-terminal device, this can be done either by connecting the gate terminal to the cathode (leakage current), or by connecting the control electrode to the cathode (reverse voltage).

The NTVB300SC-L is a great solution for controlling voltage transients in a wide variety of applications. Its fast response time, wide voltage range, and low leakage current make it ideal for protecting against overvoltage transients. In addition, it is relatively easy to configure, with adjustable turn-on and turn-off times, adjustable trip time, and adjustable trip voltage.

The specific data is subject to PDF, and the above content is for reference