NX5P2925CUKZ

Voltage - Load:	0.8 V ~ 5.5 V
Supplier Device Package:	6-WLCSP (0.87x1.37)
Package / Case:	6-XFBGA, WLCSP
Operating Temperature:	-40°C ~ 85°C (TA)
Fault Protection:	Reverse Current
Features:	Load Discharge, Slew Rate Controlled
Input Type:	Non-Inverting
Rds On (Typ):	18 mOhm
Current - Output (Max):	2.5A
Voltage - Supply (Vcc/Vdd):	Not Required
Series:	NX5
Interface:	On/Off
Output Type:	N-Channel
Output Configuration:	High Side
Ratio - Input:Output:	1:1
Number of Outputs:	1
Switch Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

NX5P2925CUKZ is a power management integrated circuit (PMIC) designed by Nexperia. It is categorized as a power distribution switch and load driver that is widely used in consumer electronics and other related applications.The device is composed of two main parts: a power switch control circuit (PSC) and a load driver (LD). The main purpose of the PSG is to protect the load from unexpected over-voltage and under-voltage conditions. It provides power switch control and fault detection capabilities. It also features built-in diagnostics and a low-voltage detection (LVD) functionality that is adjustable up to 6.2V.The load driver (LD) provides the necessary current for the device’s load. It has two adjustable PDs that can be set up to 6.2A and 10A, respectively. The LD is equipped with a built-in power-on-reset (POR) solution that safeguards against unexpected power disturbances.The NX5P2925CUKZ PMIC is designed with a low on-resistance (RON) P-channel MOSFET, which is capable of reducing the power dissipation and lowering the supply current rating. It also boasts a high switching frequency (1MHz) and can support load ranges up to 10A.Working PrincipleThe power switch control circuit (PSC) works together with the load driver (LD) to provide the necessary power distribution and load driving capabilities. The PSC is responsible for providing the necessary control signals for controlling the operation of the LD.The PSC includes a low-dropout (LDO) voltage regulator and a power switch control logic. The LDO is used to maintain a stable output voltage in the event of a power disturbance. The power switch control logic is responsible for providing the necessary timing and control signals for controlling the LD. It uses low-level switching signals to selectively turn on and off the power switches in the power switch control circuit.The load driver (LD) is responsible for providing the necessary current for the device’s load. It utilizes the power switch control logic to enable or disable the load driver output. It then uses high-level switching signals to control the output current. The NX5P2925CUKZ PMIC is designed to be an efficient, reliable, and cost-effective option for those looking for a power distribution switch and load driver device. It offers a wide range of features, such as adjustable PDs, a built-in POR solution, and low-voltage protection. It also provides a high-performance solution with its low RON P-channel MOSFET and high switching frequency. The device also boasts a wide temperature range, making it suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description