NYC228STT1G Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, namely Silicon Controlled Rectifiers (SCRs), are three-terminal semiconductor devices typically used to regulate current or in switching applications. A type of thyristor, the NYC228STT1G is used in a wide array of applications and operation. This article will discuss the NYC228STT1G’s field of application, as well as its working principle.

Application

As a type of thyristor, the NYC228STT1G is suitable for many automotive, motor control, and power switching applications. Such applications include but are not limited to those related to the following: industrial, domestic, home appliances, lighting technology, power supplies, AC- and DC-actuator controls, and motor drives. In particular, the NYC228STT1G is used as a starter motor protection device and in the control of single-phase and three-phase motors. It is also used in power electronics, as a relay protection device, and as a switching element for contactors and motors.

In general, the NYC228STT1G is suitable for the needs of any application that requires a reliable source of electrical power. Its compact size and low cost make it ideal for a wide range of applications. The device can also be used in harsh environmental conditions, such as in high voltage, strong electromechanical, and thermal interference.

Working principle

The NYC228STT1G is a three-terminal semiconductor device that can be triggered by either pulsed or DC gate current. When gate current is applied, the thyristor switch is turned on, allowing the gate to remain on until the anode voltage drops to less than the holding current value. This is referred to as the “triggering mode”. When the anode voltage drops to less than the holding current value, the thyristor switch is turned off and only gate current can trigger it again. This is known as the “latching mode”.

The on-state voltage drop of the thyristor is quite low, ranging from 0.7 to 1.5 Volts. The on-state current is also regulated, typically ranging from 1 A to 50 A depending on the application. The device has a reverse breakdown voltage of between 100 and 6,000 A, allowing for reliable operation in a wide range of applications. The switching time for the thyristor is also very fast, ranging from 10 microseconds to 10 milliseconds.

In addition to its regulation and switching capabilities, the NYC228STT1G also has several built-in safety features. The device can monitor the voltage applied across its circuit and is capable of shutting itself off if the voltage exceeds a certain threshold, helping to protect other components in the circuit. It also has current overload protection to ensure that it is not damaged due to excessive current. Finally, it has temperature protection to ensure that it is not damaged due to excessive heat.

In summary, the NYC228STT1G is a highly reliable three-terminal semiconductor device that is suitable for a wide range of applications. It can readily provide reliable current and voltage regulation and can be triggered by pulsed or DC gate current. The device has several built-in safety features and is capable of shutting itself off if a certain threshold is exceeded. Additionally, its high switching speed, fast response time, and high current and voltage regulation capabilities make the NYC228STT1G the ideal choice for any application requiring high power switching capabilities.

The specific data is subject to PDF, and the above content is for reference