Allicdata Part #: | 399-12143-ND |
Manufacturer Part#: |
OHD1-60M |
Price: | $ 5.53 |
Product Category: | Sensors, Transducers |
Manufacturer: | KEMET |
Short Description: | SENSOR TEMP 60C 6W MAKE |
More Detail: | N/A |
DataSheet: | OHD1-60M Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 5.02740 |
5 +: | $ 4.41000 |
10 +: | $ 3.96900 |
25 +: | $ 3.52800 |
50 +: | $ 3.26340 |
100 +: | $ 2.82240 |
500 +: | $ 2.64600 |
1000 +: | $ 2.46960 |
Series: | OHD™ Thermal Guard |
Part Status: | Active |
Circuit: | SPST-NO |
Switching Temperature: | 140°F (60°C) |
Reset Temperature: | -- |
Current Rating - AC: | 0.3A (110V) |
Current Rating - DC: | 0.3A (110V) |
Tolerance: | -- |
Switching Cycles: | -- |
Termination Style: | PC Pins |
Mounting Type: | Through Hole |
Package / Case: | Axial |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The OHD1-60M is a temperature sensor and thermostat that is used to measure temperatures and control temperatures as necessary. It is a mechanical device, meaning that it does not require an external power source to operate. The OHD1-60M is designed to be mounted in an enclosure such as a wall or ceiling. It is usually used for HVAC applications, such as controlling the temperature in a room or building.
The OHD1-60M operates using a contactless sensing element that is suspended inside the enclosure. The sensing element is attached to a bimetallic strip, which is then connected to a mechanical switch. When the temperature inside the enclosure changes, either due to external factors or the operation of the HVAC system, the bimetallic strip expands or contracts in response. This causes the switching mechanism to move, and if the temperature is outside of the pre-defined limits, the switch will be triggered and the connected device powered up or down.
The OHD1-60M can be programmed with two temperature points; one that will turn on the connected device (the switch-on point) and one that will turn off the device (the switch-off point). For example, if the OHD1-60M is connected to a heating system, it can be programmed to turn on the system when the temperature drops below a pre-defined level and turn off the system when the temperature reaches a higher pre-defined level. This will allow for the temperature to remain within a user-defined range.
The OHD1-60M also has two operating modes; the normal mode and the power-on-kickstart mode. By selecting the applicable mode, the OHD1-60M can be used in applications where a short boost of power is required when the temperature is just outside the pre-defined range.
The OHD1-60M is a versatile and reliable temperature sensor and thermostat that can be used in a wide range of applications. Its contactless sensing element makes it suitable for temperature measurements in hostile environments, such as high heat, chemicals, and water. Its adjustable temperature points and two operating modes make it suitable for use in both residential and commercial settings. The OHD1-60M is a reliable and cost-effective solution for automated temperature control.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
OHD1-85B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 85C 6W BREAK |
OHD1BRACKET | KEMET | 2.72 $ | 1000 | TEMPERATURE SENSORS |
OHD1-100B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 100C 6W BREAK |
OHD1-105B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 105C 6W BREAK |
OHD1-110B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 110C 6W BREAK |
OHD1-115B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 115C 6W BREAK |
OHD1-120B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 120C 6W BREAK |
OHD1-30B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 30C 6W BREAK |
OHD1-35B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 35C 6W BREAK |
OHD1-40B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 40C 6W BREAK |
OHD1-45B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 45C 6W BREAK |
OHD1-50B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 50C 6W BREAK |
OHD1-55B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 55C 6W BREAK |
OHD1-60B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 60C 6W BREAK |
OHD1-65B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 65C 6W BREAK |
OHD1-70B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 70C 6W BREAK |
OHD1-75B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 75C 6W BREAK |
OHD1-80B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 80C 6W BREAK |
OHD1-90B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 90C 6W BREAK |
OHD1-95B | KEMET | 5.04 $ | 1000 | SENSOR TEMP 95C 6W BREAK |
OHD1-100M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 100C 6W MAKE |
OHD1-105M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 105C 6W MAKE |
OHD1-110M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 110C 6W MAKE |
OHD1-115M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 115C 6W MAKE |
OHD1-120M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 120C 6W MAKE |
OHD1-40M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 40C 6W MAKE |
OHD1-45M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 45C 6W MAKE |
OHD1-50M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 50C 6W MAKE |
OHD1-55M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 55C 6W MAKE |
OHD1-60M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 60C 6W MAKE |
OHD1-65M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 65C 6W MAKE |
OHD1-70M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 70C 6W MAKE |
OHD1-75M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 75C 6W MAKE |
OHD1-80M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 80C 6W MAKE |
OHD1-85M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 85C 6W MAKE |
OHD1-90M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 90C 6W MAKE |
OHD1-95M | KEMET | 5.53 $ | 1000 | SENSOR TEMP 95C 6W MAKE |
MANUAL RESET THERMOSTAT
CERAMIC MANUAL RESET THERMOSTAT
MANUAL RESET THERMOSTAT
AUTO RESET THERMOSTAT
AUTO RESET THERMOSTAT
AUTO RESET THERMOSTAT