OPA357AIDDARG3

Current - Input Bias:	3pA
Base Part Number:	OPA357
Supplier Device Package:	8-SO PowerPad
Package / Case:	8-PowerSOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	2.5 V ~ 5.5 V, ±1.25 V ~ 2.75 V
Current - Output / Channel:	100mA
Current - Supply:	4.9mA
Voltage - Input Offset:	2mV
Series:	--
-3db Bandwidth:	250MHz
Gain Bandwidth Product:	100MHz
Slew Rate:	150 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	1
Amplifier Type:	Voltage Feedback
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

OPA357AIDDARG3 is an operational amplifier manufactured by Texas Instruments to be used for different kinds of applications. It is an ultra-low input bias current operational amplifier that performs all kinds of linear functions, such as amplification and buffering. Its applications include instrumentation amplifiers, transimpedance amplifiers, and current or voltage buffers.

Application Field

The OPA357AIDDARG3 has various application areas. First, it can be used as an instrumentation amplifier. An instrumentation amplifier is an analog monitoring system with three operational amplifiers connected in an inverting or a non-inverting amplifier configuration. It is used to measure small signals in electronic circuits. The instrumentation amplifier increases the signal voltage by amplifying the difference between two signals. The OPA357AIDDARG3 can also be used as a transimpedance amplifier. A transimpedance amplifier is an electronic device used to convert current signals into voltage signals. Finally, it can be used as a buffer amplifier. A buffer amplifier is used to isolate an electrical circuit from its output.

Working Principle

The primary principle behind the OPA357AIDDARG3 is based on its electrical design. It has two main components, an input stage and an output stage. The input stage is made up of a pair of metal-oxide-semiconductor field-effect transistors (MOSFETs) that are used as voltage-controlled current sources. These MOSFETs convert an applied input voltage into an electric current. The output stage is composed of two p-Channel MOSFETs that are connected in a complementary voltage-mode configuration. The p-Channel MOSFETs are used to provide a high-output current.In principle, the OPA357AIDDARG3 acts as a voltage to current converter. The input voltage is first converted by the MOSFETs into electric current. This current is then multiplied by the differential gain of the device to produce the output current. Depending on the type of application, the output current can be either positive or negative. The amplified output current is then converted back into a voltage signal by the output stage MOSFETs. The output voltage is the difference between the collector and emitter voltages of the transistors.

Conclusion

The OPA357AIDDARG3 is a versatile operational amplifier that has various applications. It can be used as an instrumentation amplifier, a transimpedance amplifier, or a buffer amplifier. Its working principle is based on the electrical design of the device, which consists of an input stage and an output stage. The input stage converts an input voltage into electric current. The output stage then converts this current back into voltage. The OPA357AIDDARG3 is a useful device for various linear applications, such as amplifying and buffering.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description