P410EE104M300AH101

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are electronic components designed to suppress interference from conducted signals generated by external sources, such as power line noise in the vicinity of a device. A wide variety of filters are available in the market, ranging from small surface-mount components for noise on low-level analog inputs to large high-performance dedicated packages for suppressing extreme levels of interference. The P410EE104M300AH101 is an example of an EMI/RFI filter used in a variety of applications.

The P410EE104M300AH101 is a three-terminal EMI/RFI filter designed to suppress RFI and EMI interference from conducted sources in the range of 1-30MHz. It is designed to provide a high level of attenuation at its center frequency of 20 MHz with a minimum of 25dB of attenuation in the 1-30MHz range. This filter is available in a FILTER-PAC solution, meaning it is packaged in an inert plastic housing that prevents EMI and RFI radiation. The filter is also constructed with internal shielding to help reduce the amount of leakage.

The P410EE104M300AH101 can be used in a variety of applications. It is most commonly used in medical equipment, such as defibrillators and pacemakers, where the presence of RFI or EMI could be hazardous to the patient. It is also used in automotive systems to reduce the amount of noise generated by the engine or other automotive components. Another application where the P410EE104M300AH101 is used is in aviation systems, such as air traffic control and satellites, to suppress interference from adjacent systems. The filter can also be used in consumer electronics and telecommunications systems to reduce EMI and RFI interference.

The working principle of the P410EE104M300AH101 is based on the concept of a low-pass filter. This filter is designed with three terminals—an input, an output, and a ground. The input terminal applies the signal to the filter, while the output terminal provides the filtered output. The ground terminal provides the ground reference for the filter, allowing it to isolate the input and output terminals from each other. The filter works by attenuating the noise frequencies that are outside of its frequency range while allowing the desired frequencies to pass through and be applied to the output.

The P410EE104M300AH101 is a useful and versatile EMI/RFI filter and can be used in a variety of applications. Its high level of attenuation and its FILTER-PAC packaging make it an ideal solution for suppressing EMI and RFI interference in medical, automotive, aviation, consumer electronics, and telecommunications systems.

The specific data is subject to PDF, and the above content is for reference