P410QM223M300AH101

Resistance - Channel (Ohms):	100
Height:	0.512" (13.00mm)
Size / Dimension:	0.728" L x 0.287" W (18.50mm x 7.30mm)
Package / Case:	Radial
Mounting Type:	Through Hole
Voltage - Rated:	300VAC
Applications:	General Purpose
Operating Temperature:	-40°C ~ 85°C
ESD Protection:	No
Values:	R = 100 Ohms, C = 22µF
Series:	P410
Attenuation Value:	--
Center / Cutoff Frequency:	--
Number of Channels:	1
Technology:	RC
Filter Order:	1st
Type:	Low Pass
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction: EMI/RFI Filters (LC, RC Networks) are used extensively in a variety of applications, and the P410QM223M300AH101 is a type of EMI/RFI filter. This type of filter works by suppressing the electrical interference from external sources, such as radio frequency interference (RFI) and electromagnetic interference (EMI). It allows the desired signal to pass through, while blocking any unwanted signals from entering the system.Typical Applications: The P410QM223M300AH101 EMI/RFI Filter can be used in a variety of applications, such as telecommunications, industrial automation, power supplies, and medical systems. The filter can also be used to protect sensitive equipment from external interference, such as electromagnetic and radio frequencies.Working Principle: The working principle of the P410QM223M300AH101 EMI/RFI Filter is based on the principle of electromagnetic shielding. The filter is designed to isolate the input signal from external disturbances, which could cause interference in the signal transmission.The filter consists of two parts, the conductive layer and the dielectric layer. The conductive layer consists of a Faraday cage, which blocks the external electromagnetic energy. The dielectric layer acts as an insulator, helping to protect the shielded signals from external disturbances.When the desired signal is input into the filter, the Faraday cage helps to attenuate any external electric field and reduces the amount of interference. The dielectric layer also assists in reducing any electric field by dissipating the energy. This allows for the transmission of the desired signal without any distortion or interference.Conclusion: The P410QM223M300AH101 EMI/RFI Filter is an important component in ensuring that sensitive equipment is adequately protected from the effects of interference. It works by blocking external interference while allowing the desired signal to pass through with minimal distortion. This makes the filter an ideal solution for applications such as medical systems, industrial automation, and power supplies.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description