PAC50-DGB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors and transducers are electronic components used for measuring and monitoring pressure. They are also used for measuring and monitoring other variables such as temperature, pressure, and flow. The PAC50-DGB is a type of pressure sensor and transducer.

The PAC50-DGB is designed to measure and monitor pressure in various applications. It has two built-in outputs, one analog and one digital, to provide control signals to other devices. It also features a protective housing to protect the sensitive electronic components from the harsh conditions of the environment.

The PAC50-DGB uses a differential pressure sensor, which is capable of measuring the difference between two pressures within a range of linear pressure measurement. It is also capable of measuring differential pressures over a range of temperature and pressure ranges. The PAC50-DGB is capable of measuring with a accuracy of ±0.1 bar at a maximum pressure of 200 bar.

The working principle of the PAC50-DGB is based on the principle of the Wheatstone Bridge. The Wheatstone Bridge is a circuit that is used for measuring small changes in voltage, current, and resistance. The circuit consists of a bridge of four resistors connected in a diamond configuration. The resistors are connected to a voltage source, and the output is taken from the center of the bridge. The output is proportional to the differential pressure applied across the bridge.

The PAC50-DGB converts the analog signal from the Wheatstone Bridge into a digital signal. The digital signal is then transmitted via a 4-20mA current loop, which can be used as an interface between different devices. This enables the device to be used in conjunction with control systems, data acquisition systems, and integrated displays.

The PAC50-DGB is very reliable and easy to use. The unit is also easy to install and is designed to operate in a wide range of environmental conditions. The unit is also capable of providing a self-calibration feature which allows for a calibration point to be set without the need for expensive external equipment.

The PAC50-DGB is an ideal choice for measuring and monitoring pressure in a variety of applications. It is a reliable, easy to use and cost-effective pressure sensor and transducer that can be used in a variety of industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference