PC410L0NIP Isolators |
|
Allicdata Part #: | 425-1522-2-ND |
Manufacturer Part#: |
PC410L0NIP |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Sharp Microelectronics |
Short Description: | OPTOISO 3.75KV OPEN COLL 5MFP |
More Detail: | Logic Output Optoisolator 10Mbps Open Collector 37... |
DataSheet: | PC410L0NIP Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Data Rate: | 10Mbps |
Supplier Device Package: | 5-MFP |
Package / Case: | 6-SOIC (0.173", 4.40mm Width), 5 Leads |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 85°C |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Current - DC Forward (If) (Max): | 20mA |
Voltage - Forward (Vf) (Typ): | 1.6V |
Rise / Fall Time (Typ): | 10ns, 20ns |
Propagation Delay tpLH / tpHL (Max): | 75ns, 75ns |
Series: | OPIC™ |
Current - Output / Channel: | 50mA |
Output Type: | Open Collector |
Input Type: | DC |
Common Mode Transient Immunity (Min): | 10kV/µs |
Voltage - Isolation: | 3750Vrms |
Inputs - Side 1/Side 2: | 1/0 |
Number of Channels: | 1 |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators - Logic Output are important components in many electronic systems today. They provide a minimum level of isolation between two or more circuits while maintaining high signal fidelity, up to several hundred times better than traditional transformers. PC410L0NIP is one of the most commonly used optoisolator in this category and it has become the industry standard for communications and control applications due to its robust design, low power consumption, and cost effectiveness. In this article we will discuss PC410L0NIP\'s application field and working principle.
Application Field: PC410L0NIP optoisolators are widely used in many industrial and consumer applications such as laptop computers, automotive electronics, domestic appliances, control circuits, data acquisition systems, and industrial controllers. They are also used in the medical field, like in medical imaging systems. PC410L0NIP optoisolator\'s low power consumption and minimal skew makes it an ideal choice for microprocessor-based systems that require a minimum signal bandwidth.
Working Principle: PC410L0NIP optoisolator is based on the principle that light is blocked or transmitted when it is directed through a light-transmissive material. When the optoisolator is activated, a beam of infra-red light is shone through a light-transmissive material contained within the package. This material is physically bonded to the silicon chip, inhibiting any possibility of relative movement between the two. The infra-red light then activates a photodiode located below the chip. This photodiode converts the light signal into a small electric current, which is then passed to an electronic circuit located within the package that further converts the signal into a logic signal.
In most applications, PC410L0NIP optoisolator requires no external power supply and needs only a single ‘control’ signal to activate the optical transmission. It has a fast response time, low propagation delay, and unsurpassed noise and transient immunity when compared to traditional optoisolators. Moreover, it can easily connect to any microprocessor or other digital circuit without the need for additional components.
PC410L0NIP optoisolators have become an important component in many digital systems today due to their many advantages. With its superior performance, flexible design, and cost-effective construction, PC410L0NIP optoisolators are well-suited for a variety of industrial and commercial applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PC410L0NIP | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410L0YIP | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410L0NIP0F | Sharp Microe... | -- | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410L0YIP0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC411L0NIP0F | Sharp Microe... | -- | 1000 | OPTOISO 3.75KV PUSH PULL ... |
PC412S0NIP0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
PC411L0YIP0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
PC410L0YIT0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410L0NIT0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410S0NIP0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410LENIP0F | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
PC410LKNIP0F | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
PC410LRNIP0F | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
PC410LRYIP0F | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
PC410SSNIP0F | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
PC410SSNIPBF | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
OPTOISO 5.3KV TRI-STATE 8SMDLogic Output...
OPTOISO 5KV PUSH PULL 6SSOLogic Output O...
OPTOISO 2.5KV OPEN COLL 8SSOPLogic Outpu...
OPTOISO 1.5KV OPN COLLECTOR 8DIPLogic Ou...
OPTOISO 3.75KV PUSH PULL 8DIP GWLogic Ou...
OPTOISO 7.5KV OPEN COLL 10DIPLogic Outpu...