PC410S0NIP0F Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PC410S0NIP0F is a popular optoisolator logic output type, which has multiple application fields and principles of working. This type of optoisolator is used in many industrial applications where the electrical signals are used, for example, to drive digital displays, activate lap counters, trigger alarms, and provide input to logic circuits.

The device serves as an interface between two circuits with simple digital logic such as 5V logic outputs from a microcontroller. The optoisolator\'s output consists of a single transistor circuit which is designed to provide a low-level output signal, such as a transistor logic inverter. It isolates the digital control circuits from the load circuit via an optical channel.

A single PC410S0NIP0F optoisolator consists of an infrared LED mounted on a printed circuit board, a phototransistor, and Schottky diodes. The basic working principle of the optoisolator is simple: the LED and the phototransistor are connected in reverse direction, meaning the anode of the LED is connected to the emitter of the phototransistor, and the cathode of the LED is connected to the collector of the phototransistor.

The LED is driven by the power supply, normally 5V. When the input signal is \'1\', the internal LED of the device will be activated. This in turn will activate the phototransistor, and the collector current of the phototransistor will then flow back to the power supply. The low-level output signal will then be output from the collector of the phototransistor.

The PC410S0NIP0F is most often used in logic circuits for high-speed signal transmission, between 3V and 15V. It has a low switching speed of 2 μs with a low on state current of 4mA to 8mA, thus allowing it to be used in a variety of voltage input control circuits. The PC410S0NIP0F is designed to provide a low-level output signal, making it ideal for generating input signals for logic circuits.

The PC410S0NIP0F is also suitable for applications where power saving is important. It consumes very little power and allows the circuit to be implemented without the need for a large power supply. It is also highly reliable due to its robust construction and low failure rate. Additionally, it supports a wide operating temperature range, from -40°C to 85°C.

In summary, the PC410S0NIP0F optoisolator has a wide range of applications and is suitable for use in both industrial and consumer electronics. It is reliable, robust and energy efficient, making it an ideal choice for cost effective and high performance digital logic solutions.

The specific data is subject to PDF, and the above content is for reference