PC411L0NIP0F Isolators |
|
Allicdata Part #: | 425-2588-2-ND |
Manufacturer Part#: |
PC411L0NIP0F |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Sharp Microelectronics |
Short Description: | OPTOISO 3.75KV PUSH PULL 5MFP |
More Detail: | Logic Output Optoisolator 15Mbps Push-Pull, Totem ... |
DataSheet: | PC411L0NIP0F Datasheet/PDF |
Quantity: | 1000 |
Data Rate: | 15Mbps |
Supplier Device Package: | 5-MFP |
Package / Case: | 6-SOIC (0.173", 4.40mm Width), 5 Leads |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 85°C |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Current - DC Forward (If) (Max): | 20mA |
Voltage - Forward (Vf) (Typ): | 1.6V |
Rise / Fall Time (Typ): | 4ns, 3ns |
Propagation Delay tpLH / tpHL (Max): | 60ns, 60ns |
Series: | OPIC™ |
Current - Output / Channel: | 2mA |
Output Type: | Push-Pull, Totem Pole |
Input Type: | DC |
Common Mode Transient Immunity (Min): | 15kV/µs |
Voltage - Isolation: | 3750Vrms |
Inputs - Side 1/Side 2: | 1/0 |
Number of Channels: | 1 |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are a commonly used electrical isolating device that joins two circuits and prevents unwanted electrical interference. The PC411L0NIP0F is an optoisolator with a logic output, used to provide voltage, signal and power isolation.
The PC411L0NIP0F optoisolator operates according to the principles of integrated photonics, which allows the current flow in one circuit to be transferred to the next without direct electrical contact. The optoisolator has a LED light source at one side and an integrated detector at the other side. The LED emits light which is detected by the photoreceiver, who then outputs a proportional current or voltage output, depending on the device. This output is then fed to the input of the next circuit.
The PC411L0NIP0F features a logic output so it can be used in several different applications, most commonly in industrial automation or digital signal processing. It can be used, for example, to control a high voltage or current load using low voltage signals, isolate microcontroller and bus voltage signals, and provide a safety \'wall\' between the main and secondary circuits.
In order to use the PC411L0NIP0F, the photodetector side should be connected to the high side voltage and logic output should be connected to the control side. When the LED input is at a lower voltage than the photodetector, the logic output of the optoisolator will be low. Alternatively, when the LED is higher than the photodetector, the logic output will be high. This allows the optoisolator to be used as either an open collector or as an open drain.
The PC411L0NIP0F optoisolator provides excellent electrical isolation between the input and output circuits. This makes it suitable for applications such as microcontroller interfacing, data encoding, signal conditioning, frequency modulation, and transformer coupling. It is also suitable for applications in which high operation reliability, accuracy and safety are demanded, such as automotive electronics, medical systems, critical control systems, aerospace, and analog signal processing.
The PC411L0NIP0F optoisolator features a high level of isolation between the input and output, allowing for higher voltage, current and power to be transferred between circuits. This makes it well-suited to applications which need to handle a higher power or voltage signals, such as industrial automation, motor control, power electronics, switching applications, and electronic control systems.
The PC411L0NIP0F optoisolator is an ideal choice for a wide range of applications which require electrical isolation. Its logic output, combined with its high level of isolation, makes it an excellent choice for applications which demand reliability and accuracy.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PC410L0NIP | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410L0YIP | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410L0NIP0F | Sharp Microe... | -- | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410L0YIP0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC411L0NIP0F | Sharp Microe... | -- | 1000 | OPTOISO 3.75KV PUSH PULL ... |
PC412S0NIP0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
PC411L0YIP0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
PC410L0YIT0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410L0NIT0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410S0NIP0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
PC410LENIP0F | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
PC410LKNIP0F | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
PC410LRNIP0F | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
PC410LRYIP0F | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
PC410SSNIP0F | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
PC410SSNIPBF | Sharp Microe... | 0.0 $ | 1000 | ELECTRONIC COMPONENT OPTO |
OPTOISO 5.3KV TRI-STATE 8SMDLogic Output...
OPTOISO 5KV PUSH PULL 6SSOLogic Output O...
OPTOISO 2.5KV OPEN COLL 8SSOPLogic Outpu...
OPTOISO 1.5KV OPN COLLECTOR 8DIPLogic Ou...
OPTOISO 3.75KV PUSH PULL 8DIP GWLogic Ou...
OPTOISO 7.5KV OPEN COLL 10DIPLogic Outpu...