PC853XPJ000F Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components which are used primarily to electrically isolate signals within a circuit. One of the more common type of optoisolators is the transistor, photovoltaic output. This type of optoisolator consists of a light source and a photodiode which is connected to a transistor. This allow light to be transmitted from the light source to the transistor, activating the transistor which in turn triggers the circuit. One example of this type of optoisolator is the PC853XPJ000F.

The PC853XPJ000F is a phototransistor optoisolator which is typically used for a range of different applications. It can be used to isolate signals between high and low power circuits, providing extra protection from noise. It can also be used as an interface between digital ICs and analog ICs, as well as between different voltage levels. This optoisolator can also be used to provide insulation between a microprocessor and an output stage, ensuring that signals remain isolated.

The PC853XPJ000F features a collector to emitter breakdown voltage of 80V. It also has a peak forward current of 100mA and a continuous forward current of 20mA. When it comes to optically coupling, the PC853XPJ000F has a maximum transistor collector-emitter voltage of 1V. It also has a minimum insulation voltage rating of 3450Vrms. The optoisolator also has a minimum off-state current of 0.2mA.

The working principle of the PC853XPJ000F is relatively simple. When the circuit is activated, the light source will trigger the photodiode. This converts the light into an electrical signal which is then transmitted to the transistor, activating the transistor. This then triggers the circuit, allowing the signal to be passed from one part of the circuit to another. It should be noted that the PC853XPJ000F is a unidirectional device, meaning that it will only pass signals from the light source to the transistor.

Overall, the PC853XPJ000F is a particularly useful optoisolator for a range of applications. It is capable of providing further isolation between signals, and can also be used for interfacing between digital and analog ICs, as well as between different voltage levels. It features an impressive collector-emitter breakdown voltage of 80V, and has a minimum insulation voltage rating of 3450Vrms. The working principle of the PC853XPJ000F is also relatively simple, making it a great option for those in need of an optoisolator.

The specific data is subject to PDF, and the above content is for reference