PCA9554PW,112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PCA9554PW,112 is a part of the PCA9554 family of I/O expanders. I/O expanders are devices designed to extend the I/O capability of a master processor or microcontroller with the I/O pins that are available on the Board. I/O expanders are divided into two categories: transmission based (RS-232, SPI, I2C), and direct connection-based (GPIO, TTL). The PCA9554PW,112 is a direct connection-based I/O expander which operates on an I2C interface.

The PCA9554PW,112 is a 16-bit I/O expander providing up to 8 bits of GPIO pins and 8 bits of general purpose programmable I/O. It is designed to operate as a slave device with a standard I2C bus master; it supports both single-byte and multi-byte transactions. The expander can be set up to toggle at specific operating levels and can be programmed via serial input pins. It also features programmable pull-up resistors and open drain output buffers, allowing it to be easily connected to different kinds of loads, such as LEDs and other semiconductor devices.

The PCA9554PW,112 has two main applications. It is commonly used to provide flexibility in the routing of signals to and from an I2C interface. This means that a single I2C interface can be used for multiple applications, for example for controlling multiple LED displays or for multiple temperature or humidity sensors. Secondly, the PCA9554PW,112 can be used to extend the number of I/O pins available on a board. This means that a board with limited I/O ports can be extended to offer a wide range of functions and connections, for example for remote sensors, or for multiple serial devices.

The PCA9554PW,112 is an IC (integrated circuit) which features a flexible control architecture and is ideal for a wide range of applications. The expander requires minimal external components, allowing it to save board space and cost. The expander is designed to be power efficient, consuming a maximum supply current of 4 mA when operating at 3.3 V and employing an automated power management system.

In terms of working principle, the PCA9554PW,112 operates in slave mode and is interfaced to the master device using an I2C bus. The expander features a programmable logic array (PLA), which operates as the control unit for the device. The PLA contains logic modules to control the direction and logic state of the pins and can be programmed from the master device.

To control the PCA9554PW,112, the master device transmits data bytes to the expander via the I2C bus. The data bytes consist of the I2C address of the expander, followed by a control byte for configuring the logic level of the pins, and finally a data byte storing the logic state data for the pins. The expander, upon receipt of a valid data byte, responds with an acknowledgement byte.

The programmable logic array (PLA) of the PCA9554PW,112 is composed of two separate modules: a direction control module, and a logic state control module. The direction control module is responsible for configuring the pins of the expander as either input or output pins. When a pin is configured as an input pin, the expander will monitor the logic level at the pin and transmit the logic level data over the I2C bus to the master device.

The logic state control module is responsible for setting the output logic levels of the pins of the expander. When a pin is configured as an output pin, the logic state control module allows the expander to set the logic level of the pin to either high or low. This is accomplished by sending a control byte to the expander, containing the logic state for the pins.

In conclusion, the PCA9554PW,112 is an I/O expander which operates on an I2C interface. It provides a wide range of applications, such as circuitry routing, extending I/O pins, and signal multiplexing. It is designed to be power efficient and requires minimal external components. Its working principle is based on a programmable logic array (PLA), which enables the control of the I/O pins of the expander.

The specific data is subject to PDF, and the above content is for reference