PCA9675D,112

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Number of I/O:	16
Interface:	I²C
Interrupt Output:	Yes
Features:	POR
Output Type:	Push-Pull
Current - Output Source/Sink:	100µA, 25mA
Clock Frequency:	1MHz
Voltage - Supply:	2.3 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	24-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	24-SO
Base Part Number:	PCA9675

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to PCA9675D,112
The PCA9675D,112 is a 16-bit I/O expander with the built-in dual-channel optical isolator interface. It provides the insulation between the two sides of the data bus, in order to address the needs of high-voltage applications, such as automotive and electric appliances, where the data buses may be subject to noise. The device can be configured to read, write, and/or drive the data bus on either side of the isolation barrier.Application Fields
The PCA9675D,112 is primarily used in automotive and electric appliances applications, such as power-steering systems, lighting systems, and electric locks. The device is designed to help reduce the amount of wiring between microcontrollers and other I/O devices, eliminating the need to route additional wires. In addition, the optical isolator ensures that the data bus remains safe from electromagnetic interference (EMI) and other sources of noise.Working Principle
The PCA9675D,112 utilizes an optical isolator to provide an interface between the two sides of the data bus. The optical isolator is a specialized device composed of two optical devices, such as a pair of LED and photodiode, that are used to transfer high-frequency signals across the isolation barrier. The device can be configured to read, write, and/or drive the data bus on either side of the isolation barrier.The PCA9675D,112 contains two ports, an SPI bus and a PWM port. The SPI bus is used to transfer data from the device to the attached microcontroller, while the PWM port is used to drive I/O devices. The device can be configured so that it can be read by the microcontroller and/or drive I/O devices.The PCA9675D,112 is designed to conserve energy by maintaining the minimum required state of the I/O lines. This power Conservation Mode is configured by a register in the device, which is programmed via the SPI bus. The register will remain in its current state until it is reset or until a new Power Conservation Mode is selected.Conclusion
The PCA9675D,112 is a 16-bit I/O expander with built-in dual-channel optical isolator interface. It is designed for use in automotive and electric appliances applications and helps reduce the amount of wiring needed for such systems. The device features a SPI bus and a PWM port, and utilizes an optical isolator to provide an interface between the two sides of the data bus. The device can be configured to read, write, and/or drive the data bus on either side of the isolation barrier. It also features a Power Conservation Mode, which can help conserve energy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description