PCF8575DBQRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PCF8575DBQRG4, as one of the In-Circuit Serial Interface-I/O Expanders, provides a low pin-count and powerful interface between simple microprocessor systems and a large range of digital devices. It is ideally suited for applications requiring data transparent communication between multiple devices and devices supporting I²C protocols.

PCF8575DBQRG4 features a maximum operating frequency of 3.4 MHz with a low logic pin-count of 8-pins and support for 8bits-16bits read and write operations.

This product is manufactured by NXP Semiconductors and made up of a low pin-count two-wire serial EEPROM, which is connected to a simple control logic circuit. The control logic provides the necessary protocol signals for communication with the PCF8575DBQRG4, including the start/stop signals, chip select/Acknowledge, and read/Write. The device is then operated, as with any I²C serial EEPROM device, by sending the appropriate I²C command bus from the microcontroller.

The PCF8575DBQRG4 is primarily used for I/O expander applications, and offers an efficient solution for port expansion for multiple microprocessor systems. The device offers 8bits-16bits read and write operations and can be used for USB or other 10/100 Mbit Ethernet or other communication networks. Additionally, the device can be used for system bridge and cross-bar connection in applications such as digital signal processors (DSPs), digital controllers, and embedded operating systems.

PCF8575DBQRG4 also supports 8 sets of addressable I/O ports, each port can be used to connect up to 32 sets of I/O devices. The addressable output ports provide a direct connection to various devices such as LEDs, LCDs, motors, actuators, sensors, relays, switches and other digital integrated circuits. The addressable input ports provide an easy connection to various external components such as key-pads, buttons, rotary encoders, and potentiometers. The PCF8575DBQRG4 also supports 8 bits and 16 bits addressing for data communication in the I²C protocol.

The PCF8575DBQRG4 is designed with a low-power CPLD that supports data command formats such as write, modify and read from the addressable ports. It is capable of providing up to 8 bits of data which can be input or output from the addressable port. The device also supports external interrupt edge and level triggered interrupts that can be used to detect a change in the level of the status of the addressable port.

The PCF8575DBQRG4 is capable of addressing up to 32 devices, and supports I/O port configurations of 8-bit, 12-bit, and 16-bit modes. This device is ideal for applications which require multiple ports for multiple devices. It can be used for small embedded systems, automation sensors, and industrial applications.

The PCF8575DBQRG4 features an open collector output drive that ensures that the current is limited preventing excessive power consumption, and also provides an easy interface to microcontroller bus lines. It is compatible with multiple microprocessor systems, such as ARM and 8/16 microcontrollers, as well as FPGA/ASIC based designs. Additionally, the device supports an I²C bus which allows for a maximum operating frequency of 3.4 MHz.

The PCF8575DBQRG4 is low cost and highly reliable, making it an ideal choice for applications requiring an interface between multiple devices and microprocessor systems. It is a great solution for embedded and industrial applications requiring several ports for multiple devices.

The specific data is subject to PDF, and the above content is for reference