PE42724A-Z RF/IF and RFID

Series:	UltraCMOS®
Packaging:	Tape & Reel (TR)
Part Status:	Active
RF Type:	--
Topology:	Reflective
Circuit:	SPDT
Frequency Range:	5MHz ~ 1.79GHz
P1dB:	--
IIP3:	--
Features:	--
Impedance:	75 Ohm
Voltage - Supply:	2.3 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Package / Case:	12-WFQFN Exposed Pad
Supplier Device Package:	12-QFN (3x3)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PE42724A-Z RF Switches

The PE42724A-Z is a range of RF switches from Peregrine Semiconductor Corporation, designed for use in high-performance signal routing applications. With its compact size, low cost, and excellent RF performance, the PE42724A-Z is an ideal choice for designers looking for a reliable low-power switch solution that delivers consistent results.

Applications

The PE42724A-Z can be used in many different wireless communications systems, including: cellular and VoIP networks, wireless LANs, private radio systems, GSM/GPRS, UMTS, GPS/GNSS, and digital radio systems. Additionally, the PE42724A-Z is suitable for 4G/LTE networks, WiMax, and Bluetooth networks. There are also many possible applications for the PE42724A-Z in industrial and consumer electronics, such as: TV or radio signal switching, point-of-sale machines, vehicle navigation and in-dash entertainment systems, and sensor networks.

Features

The PE42724A-Z is designed to reduce signal latency, allowing for faster response times and improved performance in wireless networks. The switches have a low insertion loss, and a very low power consumption – using less than 8mW, the PE42724A-Z can significantly reduce the power requirements of any electronic system. The PE42724A-Z is designed to operate from -30 to +85 degrees Celsius in complex environmental conditions. Additionally, the switch is designed to operate in high-bandwidth signal routing applications, with a frequency range of 2GHz to 6GHz and a control voltage of 1.8V to 3.3V.

Working Principle

At the core of its design, the PE42724A-Z switch is based on Peregrine\'s high-performance UltraCMOS™ technology. This technology integrates a high-performance RF switch with an internal control logic system, allowing for high-speed operation and minimal power consumption. The PE42724A-Z is designed to enable signal routing between two ports, allowing for an uninterrupted, low-loss flow of signals. The PE42724A-Z is controlled using logic signals, including TTL (Transistor Transistor Logic) and CMOS (Complementary Metal Oxide Semiconductor) signals. The switch will respond to a logic high voltage (VCC) or low voltage (GND) signal. An integrated Digital to Analog Converter (IDAC) also allows for fine-tuning of the switch\'s on-resistance.

Conclusion

The PE42724A-Z from Peregrine Semiconductor Corporation is a versatile and reliable range of RF switches, designed to meet the needs of high-performance signal routing applications. With its low insertion loss, low power consumption, and wide frequency range, the PE42724A-Z is an ideal choice for designers looking for a reliable switching solution for any wireless network or electronic product.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description