PH100S280-24

Current - Output (Max):	4.2A
Control Features:	Enable, Active Low
Size / Dimension:	3.85" L x 1.61" W x 0.50" H (86.0mm x 41.0mm x 12.7mm)
Package / Case:	Module
Mounting Type:	Through Hole
Efficiency:	--
Operating Temperature:	-20°C ~ 85°C
Features:	Remote On/Off, OCP, OTP, OVP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	PH-S
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input (Max):	400V
Voltage - Input (Min):	200V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC converters are versatile electrical components that convert direct current (DC) from one voltage level to another. These components are commonly used in a wide variety of electronics, from cell phones to cars. PH100S280-24 is a type of DC DC converter designed for applications that require high power. In this article, we will discuss the application field and working principle of the PH100S280-24.The PH100S280-24 is a single-phase, non-isolated DC DC converter that can supply up to 280 watts of power. It is a very efficient part that is suitable for a wide variety of applications, such as industrial automation, automotive, solar, telecommunications, and networking. This component is typically used in applications where a high power output and reliability are necessary, such as in power supplies, motor drives, and lighting applications.The PH100S280-24 uses synchronous rectification and synchronous buck topology for a power conversion efficiency up to 96%. This feature improves system reliability because it reduces the amount of heat generated by the converter. The PH100S280-24 also has a wide input voltage range from 4.5V to 36V and an adjustable output voltage from 0.8V to 28V. This allows the converter to be used in a variety of applications and makes it suitable for a variety of input sources such as AC/DC adapter, automotive, solar, and even battery power.The PH100S280-24 has several safety features built in, such as over-voltage, over-current, and short-circuit protection. This ensures that the component does not get damaged or cause any damage to the system in the event of an unexpected voltage or current surge. Additionally, the component also has an auto-restart feature, which helps to protect against sudden shut-offs and helps to maintain a consistent output voltage.The working principle of the PH100S280-24 is relatively simple. The component takes in a direct current at one voltage level and converts it to another voltage level. The process begins with an input voltage that is rectified to a higher direct current voltage. This voltage is then supplied to a step-down DC/DC converter which converts it to the desired output voltage. The component also includes a feedback circuitry that helps to maintain the output voltage within a certain range. The output voltage is then regulated and sent back to the input of the step-down DC/DC converter, allowing for a continuous cycle of power conversion.In summary, the PH100S280-24 is a single-phase, non-isolated DC DC converter that is suitable for a wide variety of industrial, automotive, and telecom applications. It is designed for high power outputs and is very efficient, with a conversion efficiency of up to 96%. The converter features adjustable input and output voltages, as well as several safety features, such as over-voltage, over-current, and short-circuit protection. The component works by rectifying the input voltage to a higher voltage and then using a step-down DC/DC converter to convert it to the desired output voltage. With its features and capabilities, the PH100S280-24 is an ideal choice for many applications that require reliable high power output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description