PIC10F322-E/P

Program Memory Type:	FLASH
Base Part Number:	PIC10F322
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Operating Temperature:	-40°C ~ 125°C (TA)
Oscillator Type:	Internal
Data Converters:	A/D 3x8b
Voltage - Supply (Vcc/Vdd):	2.3 V ~ 5.5 V
RAM Size:	64 x 8
EEPROM Size:	--
Series:	PIC® 10F
Program Memory Size:	896B (512 x 14)
Number of I/O:	3
Peripherals:	Brown-out Detect/Reset, POR, PWM, WDT
Connectivity:	--
Speed:	16MHz
Core Size:	8-Bit
Core Processor:	PIC
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PIC10F322-E/P is an 8-bit microcontroller that belongs to the PIC10F family. It is a low-cost, low-power and highly integrated microcontroller, with a wide range of features, such as 128-byte RAM, 1024-word ROM, an onboard oscillator, an ADC, a temperature sensor, and low power consumption. It features eight I/O lines, an integrated 8-bit timer, and 1K bytes of EEPROM data memory.The PIC10F322-E/P is an ideal choice for applications that require a low cost and small form-factor microcontroller that offers a good level of customization and performance. The device is also suitable for project where space and power are limited.The Controller’s architecture consists of four main components: the Core, Program Memory, Data Memory and I/O. The Core is responsible for executing the instructions of the program, while the Program Memory is where the program code is stored. The Data Memory holds the data used in the program and the I/O serves as the data interface between the device and the external world. The PIC10F322-E/P has an on-chip oscillator, which provides the system clock. With this oscillator, the device can operate in sleep mode, which significantly reduces its power consumption. In this case, the device wakes up for system-level events and completes any task it was assigned before going to sleep again. The onboard oscillator can also be programmed for a range of frequencies, from 31 kHz to 4MHz.The PIC10F322-E/P also features a 10-bit Analog-to-Digital Converter (ADC). This ADC allows the microcontroller to measure a wide array of analog signals and convert them into a digital form for processing. The ADC also features a selectable input range, providing flexibility for a variety of applications.The PIC10F322-E/P also features a 8-bit timer module, which works with the on-chip oscillator to generate accurate time delays or count events.The timer can generate signals of up to 16MHz and its modes can be set to generate delays with specific intervals.The PIC10F322-E/P also comes with some built-in peripherals, such as internal temperature sensor, a selectable Watchdog Timer (WDT) with its own clock source, pull-up and pull-down resistors, and a programmable Brown Out Detect (BOD) circuit.In terms of applications, the PIC10F322-E/P is often used for small projects in automotive, home automation, medical, industrial and consumer electronics applications. It is also used by hobbyists, in between power saving user-interface items and low power embedded system applications.The PIC10F322-E/P provides a very versatile microcontroller packed in a small form factor and low power consumption, making it ideal for specialized applications where a low cost, low power microcontroller is required. With its wide range of features, it is also suitable for development projects that require increased flexibility and control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description