PIC12F510-E/SN

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

Microchip's PIC12F510-E/SN device The technology is a low-cost, high-performance, 8-bit, fully static, flash-based CMOS microcontroller. them Adopt RISC architecture with only 33 words/ Single cycle instructions. All instructions are single cycle, except for program branches which require two cycle. Available on PIC12F510/16F506 devices Performance is an order of magnitude higher than them Competitors at the same price. 12 bits wide The instructions are highly symmetrical, resulting in Typical 2:1 code compression ratio other 8 bits Microcontroller in its class. Easy-to-use and easy-to-remember instruction set reduces development time significantly. PIC12F510/16F506 product equipment Special functions to reduce system cost and power consumption Require. Power-on reset (POR) and The device reset timer (DRT) eliminates External reset circuit. There are four oscillator configurations to choose from (there are six on the PIC16F506), Including INTOSC internal oscillator mode and Power saving LP (low power) oscillator mode. Energy-saving sleep mode, watchdog timer and Code protection function can increase system cost and power consumption And reliability. PIC12F510/16F506 devices allow customers Take full advantage of Microchip's price leadership Flash programmable microcontroller, while benefiting From Flash programmable flexibility. PIC12F510/16F506 products consist of one Full-featured macro assembler, software simulator, In-circuit emulator, "C" compiler, low cost Development programmers and full-featured programmers. All tools are on IBM® PC and Compatible machines.

2. Pin configuration

3. High-Performance RISC CPU

    1. Only 33 Single-Word Instructions to Learn

    2. All Single-Cycle Instructions except for Program Branches, which are Two-Cycle

    3. 12-Bit Wide Instructions

    4. Two-Level Deep Hardware Stack

    5. Direct, Indirect and Relative Addressing modes for Data and Instructions

    6. 8-Bit Wide Data Path

    7. 10 Special Function Hardware Registers (PIC12F510)

    8. 13 Special Function Hardware Registers (PIC16F506)

    9. Operating Speed:

        - DC – 8 MHz Crystal Oscillator (PIC12F510)

        - DC – 500 ns instruction cycle (PIC12F510)

        - DC – 20 MHz Crystal Oscillator (PIC16F506)

        - DC – 200 ns instruction cycle (PIC16F506)

4. Special Microcontroller Features

    1. 4 or 8 MHz Selectable Precision Internal Oscillator:

        - Factory calibrated to ±1%

    2. In-Circuit Serial Programming™ (ICSP™)

    3. In-Circuit Debugging (ICD) Support

    4. Power-on Reset (POR)

    5. Device Reset Timer (DRT):

        - Short DRT (1.125 ms, typical) for INTOSC, EXTRC and EC

        - DRT (18 ms, typical) for HS, XT and LP

    6. Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation

    7. Programmable Code Protection

    8. Multiplexed MCLR Input Pin

    9. Selectable Internal Weak Pull-Ups on I/O Pins

  10. Power-Saving Sleep mode

  11. Wake-up from Sleep on Pin Change

  12. Wake-up from Sleep on Comparator Change

  13. Selectable Oscillator Options:

        - INTOSC: 4/8 MHz precision Internal oscillator

        - EXTRC: External low-cost RC oscillator

        - XT: Standard crystal/resonator

        - LP: Power-saving, low-frequency crystal

        - HS: High-speed crystal/resonator (PIC16F506 only)

        - EC: High-speed external clock input (PIC16F506 only)

  14. Analog-to-Digital (A/D) Converter:

        - 8-bit resolution

        - 4-input channels (1 channel is dedicated to conversion of the internal 0.6V absolute voltage reference)

  15. High Current Sink/Source for Direct LED Drive

  16. 8-Bit Real-Time Clock/Counter (TMR0) with 8-Bit Programmable Prescaler

5. Low-Power Features/CMOS Technology

    1. Operating Current:

        - < 175 μA @ 2V, 4 MHz, typical

    2. Standby Current:

        - 100 nA @ 2V, typical

    3. Low-Power, High-Speed Flash Technology:

        - 100,000 cycle Flash endurance

        - > 40-year retention

    4. Fully Static Design

    5. Wide Operating Voltage Range: 2.0V to 5.5V

    6. Wide Temperature Range:

        - Industrial: -40°C to +85°C

        - Extended: -40°C to +125°C

6. Peripheral Features (PIC12F510)

    1. 6 I/O Pins

        - 5 I/O pins with individual direction control

        - 1 input only pin

    2. 1 Analog Comparator with Absolute Reference

7. Applications

The PIC12F510/16F506 devices fit in applications ranging from personal care appliances and security systems to low-power remote transmitters/receivers. The Flash technology makes customizing application programs (transmitter codes, appliance settings, receiver frequencies, etc.) extremely fast and convenient. The small footprint packages, for through hole or surface mounting, make these microcontrollers perfect for applications with space limitations. Low-cost, lowpower, high-performance, ease-of-use and I/O flexibility make the PIC12F510/16F506 devices very versatile, even in areas where no microcontroller use has been considered before (e.g., timer functions, logic and PLDs in larger systems and coprocessor applications).

8. Package overview