PIC16C56AT-04E/SS

Program Memory Type:	OTP
Base Part Number:	PIC16C56A
Supplier Device Package:	20-SSOP
Package / Case:	20-SSOP (0.209", 5.30mm Width)
Operating Temperature:	-40°C ~ 125°C (TA)
Oscillator Type:	External
Data Converters:	--
Voltage - Supply (Vcc/Vdd):	3 V ~ 5.5 V
RAM Size:	25 x 8
EEPROM Size:	--
Series:	PIC® 16C
Program Memory Size:	1.5KB (1K x 12)
Number of I/O:	12
Peripherals:	POR, WDT
Connectivity:	--
Speed:	4MHz
Core Size:	8-Bit
Core Processor:	PIC
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

PIC16C56AT-04E/SS is an 8-bit RISC architecture from Microchip Technology that combines the power of their proprietary PIC microcontrollers and ASICs (Application Specific Integrated Circuits). This robust processor contains on-chip memory and can be used for a variety of embedded applications. It is also equipped with low-power features to maximize efficiency and minimize overall energy consumption. This article will discuss the application fields and working principles of the PIC16C56AT-04E/SS.

What Is PIC16C56AT-04E/SS?

PIC16C56AT-04E/SS is a powerful 8-bit RISC-based microcontroller with a variety of advanced features. It includes on-chip memory, a timer/counter, 8-bit A/D converter, Pulse Width Modulation (PWM), Serial Peripheral Interface (SPI), Universal Synchronous Asynchronous Receiver Transmitter (USART) and Enhanced Capture/Compare/PWM (ECCP) modules. It also includes on-board Flash memory, which enables the device to retain program code and data even when it is powered off. The device is also equipped with a number of low-power features such as a Sleep-on-Sleep and Idle modes, a Brown-out Reset, and programmable power management.The PIC16C56AT-04E/SS contains up to 16Kx16 bits of Flash Program Memory, 512x8 bits of Data EEPROM, 768 bytes of RAM and 128 bytes of Data EEPROM. It is also designed with a 8-bit keyword instruction set and a hardware interrupt capability. It operates at 11MHz maximum instruction frequency, with a maximum operating voltage of 5.5V.

Application Fields

The PIC16C56AT-04E/SS is well-suited for a variety of embedded applications, such as automotive and industrial applications. Automotive applications include engine control systems, active safety systems, drive-by-wire systems, and passenger comfort applications. Industrial applications include factory and process automation, building automation, medical equipment, and consumer electronics.The PIC16C56AT-04E/SS is particularly well-suited for the automotive industry due to its low power consumption and wide range of advanced features. Its low power consumption means that it can be used in battery-operated applications without significantly increasing battery drain. Its advanced features, such as its on-chip Flash memory, its 8-bit keyword instruction set, and its hardware interrupt capability, make it a powerful and capable microcontroller for a variety of automotive and industrial applications.

Working Principle

The PIC16C56AT-04E\'s working principle is simple: it takes data from an instruction set written in assembly language, instantiates it in memory, and then processes it. The microcontroller has various features including instruction set, registers, and interrupts that facilitate this process. The instruction set is the language in which the instructions to be executed by the microcontroller are written. It is composed of instructions that operate on data stored in the registers. Registers are individual memory locations used by the microcontroller to store or manipulate data. Each register has a unique address that can be referenced in machine code instructions.Interrupts can be used by the microcontroller to respond to events that occur while it is executing instructions. An interrupt is a signal that is sent by an external device to the microcontroller, telling it to pause its current operation and execute a specific set of instructions (interrupt service routine). Once the interrupt service routine is complete, the microcontroller resumes its previous operation. The PIC16C56AT-04E/SS is a powerful and capable microcontroller that can be used for a variety of embedded applications. Its low power consumption and its wide range of advanced features make it an ideal choice for automotive and industrial applications. Its simple yet powerful working principle enables users to create powerful embedded applications without having to invest significant time and effort in coding.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description