PIC16C642-10I/SP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Embedded systems are computer systems designed for specific tasks with the system or application software embedded into non-volatile memory. Microcontrollers are special-purpose computers on a single integrated circuit. PIC16C642-10I/SP is a type of microcontroller and can be used for various applications.

Introduction to PIC16C642-10I/SP

The PIC16C642-10I/SP is a 8-bit single-chip RISC microcontroller with 1KB of Program Memory and 32 bytes of EEPROM Memory. The PIC16C642-10I/SP has a maximum operating frequency of 20MHz, 20MIPS at 4.5V and is capable of addressing up to 8Kb of Program Memory and 256 bytes of EEPROM Memory. It also features 256 bytes of RAM, 3 Timer Counters, On-chip Instrumentation A/D converter, 3 Input Capture Registers, 2 Output Compare Registers, 1 UART interface, 1 SPI interface and 6 Interrupts.

Application Fields of PIC16C642-10I/SP

The PIC16C642-10I/SP microcontroller can be used in a wide range of applications. It is suitable for applications such as process control, industrial automation, medical electronics, automotive electronics, networking and communications, telecommunication, and consumer electronics. Additionally, it can be used for various low-end digital signal processing applications including digital audio and video processing, as well as image and voice recognition.

PIC16C642-10I/SP Working Principle

The PIC16C642-10I/SP microcontroller follows the Harvard architecture. The processor fetches the instructions from the Program Memory and can access the data from Data Memory. The instructions are executed using an Accumulator Register, which is the processor’s main data store. The Accumulator Register can also be used to store intermediate results during computation. The PIC16C642-10I/SP also has a set of Register Banks that can be used to extend the Accumulator Register. This microcontroller has an internal architecture consisting of two clock generators, two Timers, two CCPC comparators and two input capture registers. The two clock generators are used to generate system clock and to control and synchronize the functions of the other components of the system. The two Timers are used for timing and counting operations, while the two CCPC comparators are used for comparing two data sequences. The two input capture registers are used to store the values from the external devices. The PIC16C642-10I/SP can be programmed using a high-level language such as C or Basic. Programs can also be written using assembly language, but this requires a more extensive knowledge of microcontroller architecture. The microcontroller can be programmed using an external programmer or a debugger. Additionally, the microcontroller can be programmed through the on-chip UART or SPI interfaces.

Conclusion

In conclusion, the PIC16C642-10I/SP microcontroller is a versatile device that can be used in a variety of applications. It has a wide range of peripheral devices and can be programmed in a number of ways. The processor follows the Harvard architecture and its internal architecture consists of two clock generators, two Timers, two CCPC comparators and two input capture registers. The PIC16C642-10I/SP is a cost-effective solution for digital signal processing applications, process control, industrial automation, medical electronics, automotive electronics, networking and communications, telecommunication, and consumer electronics.

The specific data is subject to PDF, and the above content is for reference