PIC16C67-10/PT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to PIC16C67-10/PT

The PIC16C67-10/PT is a powerful 8-bit microcontroller from Microchip Technology Inc. It is a part of the mid-range family of microcontrollers and is based on the PIC16 architecture. The device is compatible with the 8-bit core and uses 8kB of Flash for program storage, 512 bytes of RAM and 64 bytes of EEPROM for data storage. The PIC16C67-10/PT also features 8 bits of I/O ports, 3 Capture/Compare/PWM modules and one Enhanced USART/SPI/I2C module. It is powered by a 5V supply, requires a maximum frequency of 16MHz and operates at temperatures ranging from 0 to +85°C.

Application Field

The PIC16C67-10/PT is mainly used in the automotive and industrial industries. It is suitable for controlling various power supplies, AC and DC motor drives, data acquisition and logging, embedded control and refining systems, peripheral interface controllers and motor control. Additionally, other areas that the device can be used are: medical equipment, home automation and robotics control and commercial and safety control.

Working Principle

The PIC16C67-10/PT is programmed through a voltage level converter or adapter that connects it to either a computer or microcontroller development board. It is written and controlled by a variety of software platforms such as MPLAB, CodeVisionAVR and Atmel Studio (for Windows). In order to work properly, a bootloader is required to be programmed into the microcontroller. The bootloader then allows writing and programming of the MCU with a serial communication protocol like UART, SPI or I2C. The heart of the microcontroller is its core, which is its processor that controls the whole system. It contains an 8-bit processor that can access 8 bits of memory at once. The processor executes instructions internally, performs arithmetic and logical operations, handles input/output and produces the results. It also consists of a set of registers and a data stack that stores values and addresses of program instructions as it executes them. An internal oscillator (oscillator) regularly generates electronic pulses, based on which the main clock of the microcontroller is adjusted. Another important part of the circuit is the Input/Output ports or I/O lines, which allow the microcontroller to interact with its external environment. I/O ports are also used to drive LEDs, generate sound waves and connect sensors.The PIC16C67-10/PT can be used as a standalone unit or can be connected to external microcontrollers or modules to increase its capability. It is also capable of communicating with other devices that are connected over a serial channel. This includes CAN (Controller Area Network) or CAN-Bus that is used in automotive and industrial applications.

Conclusion

In conclusion, the PIC16C67-10/PT is a very powerful 8-bit microcontroller from Microchip Technology Inc. It is used in various automotive and industrial applications such as motor control, peripheral interface controllers, embedded control and refining systems, medical equipment and home automation. It consists of an 8-bit processor that is controlled by a set of registers and a data stack, while a bootloader is needed to write and program the microcontroller. The device also features 8 bits of I/O ports, 3 Capture/Compare/PWM modules and one Enhanced USART/SPI/I2C module. It can be used as a standalone unit or can be connected to external microcontrollers and modules.

The specific data is subject to PDF, and the above content is for reference