PIC16F1786-I/ML

IC MCU 8BIT 14KB FLASH 28QFN
PIC PIC® XLP™ 16F Microcontr...

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. High-Performance RISC CPU:

    1. Only 49 Instructions

    2. Operating Speed:

        - DC – 32 MHz clock input

        - DC – 125 ns instruction cycle

    3. Interrupt Capability with Automatic Context Saving

    4. 16-Level Deep Hardware Stack with optional Overflow/Underflow Reset

    5. Direct, Indirect and Relative Addressing modes:

    6. Two full 16-bit File Select Registers (FSRs)

        - FSRs can read program and data memory

2. Memory Features:

    1. Up to 8 KW Flash Program Memory:

        - Self-programmable under software control

        - Programmable code protection

        - Programmable write protection

    2. 256 Bytes of Data EEPROM 

    3. Up to 1024 Bytes of RAM

3. High-Performance PWM Controller:

    1. Three Programmable Switch Mode Controller (PSMC) modules:

        - Digital and/or analog feedback control of PWM frequency and pulse begin/end times

        - 16-bit Period, Duty Cycle and Phase

        - 16 ns clock resolution

        - Supports Single PWM, Complementary, Push-Pull and 3-phase modes of operation

        - Dead-band control with 8-bit counter 

        - Auto-shutdown and restart

        - Leading and falling edge blanking

        - Burst mode

4. Extreme Low-Power Management PIC16LF1784/6/7 with XLP:

    1. Sleep mode: 50 nA @ 1.8V, typical 

    2. Watchdog Timer: 500 nA @ 1.8V, typical

    3. Timer1 Oscillator: 500 nA @ 32 kHz

    4. Operating Current:

        - 8 µA @ 32 kHz, 1.8V, typical

        - 32 µA/MHz @ 1.8V, typical

5. Analog Peripheral Features:

    1. Analog-to-Digital Converter (ADC):

        - Fully differential 12-bit converter

        - Up to 75 ksps conversion rate

        - 11 single-ended channels

        - 5 differential channels

        - Positive and negative reference selection

    2. 8-bit Digital-to-Analog Converter (DAC):

        - Output available externally

        - Positive and negative reference selection

        - Internal connections to comparators, op amps, Fixed Voltage Reference (FVR) and ADC

    3. Four High-Speed Comparators:

        - 50 ns response time @ VDD = 5V

        - Rail-to-rail inputs 

        - Software selectable hysteresis

        - Internal connection to op amps, FVR and DAC

    4. Up to three Operational Amplifiers:

        - Rail-to-rail inputs/outputs 

        - High/Low selectable Gain Bandwidth Product

        - Internal connection to DAC and FVR

    5. Fixed Voltage Reference (FVR):

        -  1.024V, 2.048V and 4.096V output levels

        - Internal connection to ADC, comparators and DAC

6. I/O Features:

    1. Up to 36 I/O Pins and 1 Input-only Pin:

    2. High Current Sink/Source for LED Drivers

    3. Individually Programmable Interrupt-on-Change Pins

    4. Individually Programmable Weak Pull-Ups

    5. Individual Input Level Selection

    6. Individually Programmable Slew Rate Control

    7. Individually Programmable Open Drain Outputs 28-Pin 8-Bit Advanced Analog Flash Microcontroller

7. Digital Peripheral Features: 

    1. Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler

    2. Enhanced Timer1:

        - 16-bit timer/counter with prescaler

        - External Gate Input mode

        - Dedicated low-power 32 kHz oscillator driver

    3. Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler

    4. Two Capture/Compare/PWM modules (CCP):

        - 16-bit capture, maximum resolution 12.5 ns

        - 16-bit compare, max resolution 31.25 ns

        - 10-bit PWM, max frequency 32 kHz

    5. Master Synchronous Serial Port (SSP) with SPI and I2CTM with:

        - 7-bit address masking

        - SMBus/PMBusTM compatibility

    6. Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART):

        - RS-232, RS-485 and LIN compatible

       - Auto-baud detect

       - Auto-wake-up on start

8. Oscillator Features:

    1. Operate up to 32 MHz from Precision Internal Oscillator:

        - Factory calibrated to ±1%, typical

        - Software selectable frequency range from 32 MHz to 31 kHz

    2. 31 kHz Low-Power Internal Oscillator 

    3. 32.768 kHz Timer1 Oscillator:

        - Available as system clock

        - Low-power RTC

    4. External Oscillator Block with:

        - 4 crystal/resonator modes up to 32 MHz using 4x PLL

        - 3 external clock modes up to 32 MHz

    5. 4x Phase-Locked Loop (PLL)

    6. Fail-Safe Clock Monitor:

        - Detect and recover from external oscillator failure

    7. Two-Speed Start-up:

        - Minimize latency between code execution and external oscillator start-up

9. General Microcontroller Features:

    1. Power-Saving Sleep mode

    2. Power-on Reset (POR)

    3. Power-up Timer (PWRT)

    4. Oscillator Start-up Timer (OST) 

    5. Brown-out Reset (BOR) with Selectable Trip Point 

    6. Extended Watchdog Timer (WDT)

    7. In-Circuit Serial ProgrammingTM (ICSPTM) 

    8. In-Circuit Debug (ICD)

    9. Enhanced Low-Voltage Programming (LVP)

  10. Operating Voltage Range:

        - 1.8V to 3.6V (PIC16LF1784/6/7)

        - 2.3V to 5.5V (PIC16F1784/6/7)

10. Pin configuration