PIC16F876A-I/SO

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. High-Performance RISC CPU

    1. Only 35 single-word instructions to learn

    2. All single-cycle instructions except for program branches, which are two-cycle

    3. Operating speed

        - DC – 20 MHz clock input 

        - DC – 200 ns instruction cycle

    4. Up to 8K x 14 words of Flash Program Memory,

        - Up to 368 x 8 bytes of Data Memory (RAM),

        - Up to 256 x 8 bytes of EEPROM Data Memory

    5. Pinout compatible to other 28-pin or 40/44-pin PIC16CXXX and PIC16FXXX microcontrollers

2. Peripheral Features

    1. Timer0: 8-bit timer/counter with 8-bit prescaler

    2. Timer1: 16-bit timer/counter with prescaler, can be incremented during Sleep via external crystal/clock

    3. Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler

    4. Two Capture, Compare, PWM modules

        - Capture is 16-bit, max. resolution is 12.5 ns

        - Compare is 16-bit, max. resolution is 200 ns

        - PWM max. resolution is 10-bit

    5. Synchronous Serial Port (SSP) with SPI (Master mode) and I2C™ (Master/Slave)

    6. Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) with 9-bit address detection

    7. Parallel Slave Port (PSP) – 8 bits wide with external RD, WR and CS controls (40/44-pin only)

    8. Brown-out detection circuitry for Brown-out Reset (BOR)

3. Analog Features

    1. 10-bit, up to 8-channel Analog-to-Digital Converter (A/D)

    2. Brown-out Reset (BOR)

    3. Analog Comparator module with:

        - Two analog comparators

        - Programmable on-chip voltage reference (VREF) module

        - Programmable input multiplexing from device inputs and internal voltage reference

        - Comparator outputs are externally accessible

4. Special Microcontroller Features

    1. 100,000 erase/write cycle Enhanced Flash program memory typical

    2. 1,000,000 erase/write cycle Data EEPROM memory typical

    3. Data EEPROM Retention > 40 years

    4. Self-reprogrammable under software control

    5. In-Circuit Serial Programming™ (ICSP™) via two pins

    6. Single-supply 5V In-Circuit Serial Programming

    7. Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation

    8. Programmable code protection

    9. Power saving Sleep mode

  10. Selectable oscillator options

  11. In-Circuit Debug (ICD) via two pins

5. CMOS Technology

    1. Low-power, high-speed Flash/EEPROM technology

    2. Fully static design

    3. Wide operating voltage range (2.0V to 5.5V)

    4. Commercial and Industrial temperature ranges

    5. Low-power consumption

6. Pin configuration

7. Pin information

PIC16F873A/876A devices are only available in 28-pin packages, while PIC16F874A/877A devices are available in 40-pin and 44-pin packages. All devices in the PIC16F87XA family have a common architecture, but there are the following differences:

    1. PIC16F873A and PIC16F874A have half of the total on-chip memory of PIC16F876A and PIC16F877A

    2. 28-pin devices have three I/O ports, while 40/44-pin devices have five

    3. 14 interrupts for 28-pin devices and 15 interrupts for 40/44-pin devices

    4. 28-pin devices have five A/D input channels, while 40/44-pin devices have eight

    5. Parallel slave port is only implemented on 40/44-pin devices