PIC16LF1575-I/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PIC16LF1575-I/ST microcontroller is an integrated device that finds wide application in the embedded control industry. It comes with flash memory and an 8-bit CPU. It supports an instruction set with addressing modes and a wide range of peripherals, including an analog-to-digital (A/D) converter, USARTs, Timers, and Interrupts.

The PIC16LF1575-I/ST microcontroller utilizes the 16-bit RISC (Reduced Instruction Set Computer) architecture and is effectively able to take complex instructions and execute them faster than its 8-bit counterparts. The controller contains 2,048 words of flash program memory and 64 bytes of static RAM. In addition, the device contains a watchdog timer, a system-wide reset pin and two reset outputs for interrupt management, including an interval timer and a power-saver mode.

In a PIC16LF1575-I/ST based system, the CPU is connected to several external devices, such as memory, input and output ports and peripheral controllers. The CPU reads and executes instructions stored in the ROM (Read Only Memory). When the instruction is executed, the CPU fetches the data stored in RAM or ROM and performs the specified operation on them. The output generated by the CPU is stored in RAM or RAM-like devices. All of the external devices connected to the microcontroller are managed by the CPU.

The PIC16LF1575-I/ST microcontroller supports three interrupt sources namely Internal Interrupts, External Interrupts and Timer Interrupts. Internal interrupts are generated by hardware events, such as the USART receiving and transmitting data, the analog-to-digital converter making a conversion, or the timer completing a cycle. External interrupts are generated by external hardware devices, such as a switch, a button or a sensor. Timer Interrupts are generated when the timer value overflows or reaches a programmable compare value.

The analog-to-digital converter of the PIC16LF1575-I/ST microcontroller provides 8-bit resolution and is capable of up to 200ksps (kilosamples per second). It supports a programmable voltage reference in order to convert an external voltage signal into a digital representation. The A/D converter can be used as a time-of-flight generator, as an analog waveform recorder, and many other applications.

The USART of the PIC16LF1575-I/ST microcontroller supports Asynchronous and Synchronous data transfer modes. It is capable of 8-bit, 16-bit and 32-bit instance data transfers. The USART can be operated in multiple baud rates, such as 9600, 19200, and 115200 bps. The USART also supports a number of flow control protocols, such as handshaking, loopback and flow control.

The Timer module of the PIC16LF1575-I/ST microcontroller can be used to generate time needed for controlling external devices, such as to sense the position of a motor shaft, to control the speed of a motor, or to count pulses. The timer also supports capture functionalities, allowing the capture of an external event\'s current timer value. The capture can be used to measure the time interval between two events.

The PIC16LF1575-I/ST microcontroller has a wide range of applications in the embedded control industry, such as motor control, consumer electronics, instrumentation, security systems, and automation systems. It is ideal for applications that require precise control over a wide range of conditions, and is designed to provide real-time performance.

The specific data is subject to PDF, and the above content is for reference