PIC18F66K80-I/PT

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Special Microcontroller Features

    1. On-Chip 3.3V Regulator

    2. Operating Speed up to 64 MHz

    3. 3.6 Kbytes of General Purpose Registers (SRAM)

    4. Three Internal Oscillators:

        - LF-INTOSC (31 kHz)

        - MF-INTOSC (500 kHz)

        - HF-INTOSC (16 MHz)

    5. Priority Levels for Interrupts

    6. 8 x 8 Single-Cycle Hardware Multiplier

    7. Extended Watchdog Timer (WDT):

        - Programmable period from 4 ms to 4,194s

    8. In-Circuit Serial Programming™ (ICSP™) via Two Pins

    9. In-Circuit Debug via Two Pins

  10. Programmable BOR

  11. Programmable LVD

2. Peripheral Highlights

    1. Five CCP/ECCP modules:

        - Four Capture/Compare/PWM (CCP) modules

        - One Enhanced Capture/Compare/PWM (ECCP) module

    2. Five 8/16-Bit Timer/Counter modules:

        - Timer0: 8/16-bit timer/counter with 8-bit programmable prescaler

        - Timer1, Timer3: 16-bit timer/counter

        - Timer2, Timer4: 8-bit timer/counter

    3. Two Analog Comparators

    4. Configurable Reference Clock Output

    5. Charge Time Measurement Unit (CTMU):

        - Capacitance measurement

        - Time measurement with 1 ns typical resolution

        - Integrated voltage reference

    6. Up to Four External Interrupts

    7. One Master Synchronous Serial Port (MSSP) module:

        - 3/4-wire SPI (supports all four SPI modes)

        - I2C™ Master and Slave modes

    8. Two Enhanced Addressable USART modules:

        - LIN/J2602 support

        - Auto-Baud Detect (ABD)

    9. 12-Bit A/D Converter with up to 11 Channels:

        - Auto-acquisition and Sleep operation

        - Differential Input mode of operation

  10. Data Signal Modulator module:

        - Select modulator and carrier sources from various module outputs

  11. Integrated Voltage Reference

3. High-Temperature Features

    1. Ambient Temperature Range of -40°C to +150°C

4. Power-Managed Modes

    1. Run: CPU on, Peripherals on

    2. Idle: CPU off, Peripherals on

    3. Sleep: CPU off, Peripherals off

    5. Two-Speed Oscillator Start-up

    6. Fail-Safe Clock Monitor (FSCM) 

    7. Power-Saving Peripheral Module Disable (PMD)

    8. Ultra Low-Power Wake-up

    9. Fast Wake-up, 1 µs, Typical

  10. Low-Power WDT, 300 nA, Typical

  11. Run mode Currents Down to Very Low 3.8 µA,Typical

  12. Idle mode Currents Down to Very Low 880 nA,Typical

  13. Sleep mode Currents Down to Very Low 13 nA,Typical

5. ECAN Bus Module Features

    1. Conforms to CAN 2.0B Active Specification

    2. Three Operating modes:

        - Legacy mode (full backward compatibility with existing PIC18CXX8/FXX8 CAN modules)

        - Enhanced mode

        - FIFO mode or programmable TX/RX buffers

    3. Message Bit Rates up to 1 Mbps

    4. DeviceNet™ Data Byte Filter Support

6. ECAN Bus Module Features (Continued)

    1. Six Programmable Receive/Transmit Buffers

    2. Three Dedicated Transmit Buffers with Prioritization

    3. Two Dedicated Receive Buffers

    4. 16 Full, 29-Bit Acceptance Filters with Dynamic Association

    5. Three Full, 29-Bit Acceptance Masks

    6. Automatic Remote Frame Handling

    7. Advanced Error Management Features