PIC18LF2480-I/SO

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PIC18LF2480-I/SO is an 8-bit microcontroller that is widely used in embedded system designs. It has an 8-bit data path and is capable of running at up to 16MHz with a Flash program memory of up to 3K Flash. The PIC18LF2480-I/SO is part of the PIC18 family of microcontrollers and is optimized for low-power, low-cost applications.

Uses of PIC18LF2480-I/SO

The PIC18LF2480-I/SO is used in a wide range of embedded applications. It is used in applications such as navigation systems, industrial monitoring and control systems, consumer electronics, and security systems. The small size of the PIC18LF2480-I/SO allows it to fit into tight spaces, making it ideal for these applications.

The PIC18LF2480-I/SO is also used in data acquisition and monitoring systems. In these applications, the microcontroller is used to monitor and control various parameters such as temperature, pressure, humidity, and other variables. It is also used in data logging systems to collect, store, and analyze large amounts of data.

The PIC18LF2480-I/SO is also used in medical applications such as medical instrumentation, diagnostic equipment, and medical diagnostics. It is used to process and store medical data, monitor patient vital signs, and perform ECG and EEG analysis.

The PIC18LF2480-I/SO is also used in automobile applications such as engine control, vehicle monitoring, and navigation systems.

Features of PIC18LF2480-I/SO

The PIC18LF2480-I/SO has a wide range of features that make it a popular choice for embedded system designers. It has a 8-bit data bus, up to 3K Flash program memory, 1K RAM, and 128 bytes of EEPROM. It also includes two 8-bit A/D converters and an I²C bus module.

The microcontroller also features an integrated op amp which can be used for analog signal processing. It also has a number of peripherals such as an UART, SPI, CANbus, and USB. It also has an energy efficient core which allows it to run at low power.

The PIC18LF2480-I/SO also has a number of features that make it suitable for low power designs. It features an idle mode, deep sleep mode, and power-down mode, which reduce power consumption significantly. It also supports a variety of sleep wake-up sources such as watchdog timer and external interrupt.

Working Principle of PIC18LF2480-I/SO

The PIC18LF2480-I/SO is based on the Harvard architecture, wherein the program and data memories have distinct paths for addressing. This allows for simultaneous access to both memories. The 8-bit data bus is used for both program and data memory addresses and data/instructions paths.

The PIC18F2480-I/SO uses a Von Neumann architecture which is made up of a Harvard architecture and a single, shared data bus. This allows for efficient use of the memory and the ability to quickly access both program and data memory at the same time.

The PIC18F2480-I/SO has a number of peripherals such as UART, SPI, I²C, CANbus, and USB. These peripherals are used to control various devices and connect them to the microcontroller. The UART is used to connect the microcontroller to other devices, while the SPI and I²C buses are used to interface with sensors and other devices.

The PIC18F2480-I/SO also has two onboard 8-bit A/D converters which are used to convert analog signals to digital data. This is used in applications such as automobile control and medical instrumentation. Lastly, the microcontroller has an op amp which is used for amplifying analog signals.

The specific data is subject to PDF, and the above content is for reference