PIC18LF2510-I/SP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• Introduction

The PIC18LF2510-I/SP is a mid-range 16-bit CMOS microcontroller with integrated Flash technology, developed by Microchip Technology Inc. It is the name of a family of integrated circuits used in embedded control applications where processing power, low power consumption and low cost are important.

• Application Field

The PIC18LF2510-I/SP microcontroller can be used in a wide range of applications, including industrial and automotive equipment, consumer products such as appliances, microwave ovens, digital cameras, cell phones and other digital devices, robotics, wireless communications and in many other products that require real-time control.

It is suitable for applications where computing power is not a critical requirement, and is therefore particularly suited to low-power devices such as battery-operated devices, remote controllers and other products where power consumption is important. It is also used in many data logging and measuring applications, such as medical, environmental and agricultural systems.

• Working Principle

The PIC18LF2510-I/SP microcontroller operates on an ATmega-Acore eight-bit processor architecture. It has 1,024 bytes of on-chip Flash memory, 4K bytes of RAM and 256 bytes of EEPROM for data storage and control applications. It is integrated with extensive peripherals including a USART, one each of a single-wire, a two-wire and a three-wire serial peripheral interface, an 8-channel, 10-bit A/D converter, three timers and three analog comparators.

The PIC18LF2510-I/SP can operate at a maximum speed of 10MHz using the internal oscillator and can be clocked at up to 30MHz using an external crystal. The microcontroller is programmed using either a PICkit or an ICD programmer. The ICD programmer is used only for debugging, whereas the PICkit is a low-cost development programmer that connects directly to the microcontroller for programming and debugging.

The microcontroller computes or executes instructions and performs functions with the help of registers, counters and program memory. Register functions store information and direct the microcontroller operations. Counter functions measure elapsed time and calculate distances. Data memory keeps track of the microcontroller’s instructions and data. Various integrated peripherals include ports, program memory, data transfer units and peripheral control units.

The PIC18LF2510-I/SP microcontroller allows users to work with a variety of hardware, including parallel buses, serial buses and various types of I/O devices. It can connect to various external devices like memory devices, displays, digital-to-analog converters, analog-to-digital converters and off-the-shelf devices. It is also capable of providing access to networks like Ethernet and CANBUS.

The microcontroller provides power saving features like power saving modes, idle mode, shutdown mode and sleep mode. It is also equipped with low-voltage programming and inverse reset to facilitate low power consumption applications. Additionally, it provides watch-dog timers and Brown out Reset which can alert users to any sudden changes in the system.

The specific data is subject to PDF, and the above content is for reference