PM2260D95VR

Contactors (Solid State) are devices used to control electrical circuits by providing an optically isolated input. The PM2260D95VR is an example of solid state contactors and is principally used for power switching applications. It features a MOSFET output stage which allows for high power operation and is controlled via a three-wire interface of the type UT6-2/UT6-3. This device is suited for high power switching applications where switching speeds of up to 40kHz are required.

The PM2260D95VR provides isolation between the input control circuits and the output power circuits. It has an insulated gate bipolar transistor (IGBT) output stage which allows for higher power operation at lower voltages. The PM2260D95VR has a logic voltage of 12-24V DC and can handle up to 8A of current. Its dielectric strength is 3000Vp, with a minimum distance of 25.4mm between the input and output circuits. The package size for the device is 2.3x3.5x5.6mm, making it suitable for space-constrained applications.

The PM2260D95VR features two optically-isolated control inputs, designated as S1 and S2. It is designed to provide the control signal S1/S2 to the MOSFET output stage, when either S1 or S2 are high. They provide electrical insulation between the control circuitry and the power circuitry, so that the power circuitry is isolated from noise and voltage spikes on the control side. This ensures that the power supply remains unaffected by the noise and is safe to operate at higher input voltage ranges.

The PM2260D95VR follows an open-collector logic. Upon activation of either S1 or S2, the gate voltage of the MOSFET output stage is increased and the PM2260D95VR turns on. When the signal is low, the gate voltage is reduced and the PM2260D95VR switches off. The on-state resistance of the device is 95mΩ, making it suitable for high power applications such as motor control. It can also be used to switch AC and DC loads up to 8A, so it can be used for a variety of switching applications.

In summary, the PM2260D95VR is a contactor (solid state device) designed for high power switching applications. It features an IGBT output stage which allows for higher power operation at lower voltages. It is equipped with two optically-isolated control inputs that can be used to control the MOSFET output stage. The PM2260D95VR has a logic voltage of 12-24V DC and can handle up to 8A of current. It is suitable for switching AC and DC loads, making it a versatile device for a variety of applications.