PM2260D95VJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
The PM2260D95VJ is a contactor designed for industrial applications. It is a solid state contactor, meaning it does not use traditional electromechanical contactors, but instead consists of an insulated case and a set of semiconductor switches. It is used in a wide variety of applications due to its high voltage and current rating, and its ability to rapidly switch high voltage circuits. In this article, we will discuss the application field and working principle of the PM2260D95VJ contactor.Application Field
The PM2260D95VJ is a high voltage contactor used in a variety of applications. It is used in industrial motor control, such as large industrial motors and compressors, as well as in motor start/stop applications. It is also used in power distribution and power factor correction applications, such as relay control, load shedding, and power factor and voltage compensation. It is also used in system-level fault protection and field-level protection applications, as well as in process control and automation applications.Working Principle
The PM2260D95VJ contactor is composed of an insulated case and a set of semiconductor switches. The insulated case is designed to protect the contactor from external elements such as dust and moisture. The semiconductor switches contain two sets: a set of AC L, A, and C contacts, and a set of DC Semiconductor switches.The AC contacts are responsible for switching the power circuit on and off. When a voltage is applied to the contactor, the L contact closes and allows current to flow through the circuit. When the voltage drops, the A contact opens and interrupts the flow of current. The C contact is used to control the rate at which the contactor switches.On the other hand, the semiconductor switches contain the main switching components of the contactor. The DC semiconductor switches contain two sets of semiconductors: one each for Power Switching and Control Switching. The Power Switching semiconductors are used to switch the current in the AC power circuit, while the Control Switching semiconductors are used to control the rate at which the Power Switching semiconductors operate. Each set of semiconductors is triggered by a control signal. When the control signal is applied, the Power Switching Semiconductors open and close, allowing the AC current to flow through the circuit. At the same time, the Control Switching Semiconductors regulate the rate at which the Power Switching Semiconductors open and close, allowing the contactor to switch the power circuit on or off in a controlled manner.Conclusion
The PM2260D95VJ contactor is a solid-state contactor used for switching high voltage and current of an AC power circuit. It is used in a wide variety of applications due to its high voltage and current rating and its ability to rapidly switch high voltage circuits. It consists of an insulated case and a set of semiconductor switches, with the AC contacts controlling when the power circuit is switched on and off, and the DC semiconductors controlling the rate at which the contactor switches.

The specific data is subject to PDF, and the above content is for reference