PMEG2010AEB,115

PMEG2010AEB,115 Diodes – Rectifiers – Single Application Field and Working Principle

The PMEG2010AEB,115 is an axial-leaded, single-phase diodes rectifier with a 1A current rating and a maximum repetitive peak reverse voltage of 600V.

This type of diode is particularly suitable for full-wave rectification with a high reverse voltage. It can be used as a transformator bridge and as an auto regulator for motor vehicle application. It is also used to construct high quality regulated power supplies.

The PMEG2010AEB,115 comes in two versions. The standard version features a two-leaded cathode and anode and requires no additional connections to be made during installation while the other has one anode lead and two additional leads which need to be soldered on in order to regulate the current capacity. This version has an increased current rating of up to 2A.

The working principle of the PMEG2010AEB,115 is based on semiconductor technology. When forward biased, it allows current to move through it. The current path is established between the anode and the cathode. When reverse bias is applied to the diode, it blocks the current from moving from the cathode to the anode. This is what creates the full-wave rectifying effect.

In the standard version, the maximum forward voltage drop is about 1.35V and the reverse leakage current is about 5mA at 25°C. The standard recovery time for the standard version is about 1.0 µs. The operating junction temperature range for the standard version is -55°C to 125°C. The operating temperature range for the high current version is -40°C to 125°C.

The PMEG2010AEB,115 is a reliable and cost-effective solution for applications where a high current capacity is needed in a limited space. Its fast switching properties, small size and low power consumption make it a suitable choice for a wide variety of applications.

In conclusion, the PMEG2010AEB,115 is a single-phase axial-leaded diode rectifier with a current rating of 1A and 600V maximum repetitive peak reverse voltage. It is especially suitable for full-wave rectification, providing a fast and reliable solution for transformer bridges, auto regulators and regulated power supplies. It is compact, efficient and cost-effective, making it a great choice for many applications.