Allicdata Part #: | PPC71DM48-ND |
Manufacturer Part#: |
PPC71DM48 |
Price: | $ 0.00 |
Product Category: | Industrial Controls |
Manufacturer: | Carlo Gavazzi Inc. |
Short Description: | 3-PHASE MONITORING RELAY |
More Detail: | N/A |
DataSheet: | PPC71DM48 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | PPC71 |
Part Status: | Active |
Type: | Voltage Asymmetry, Phase Loss, Phase Sequence |
Trip Status: | Energized High/Low |
Trip Range: | 323 ~ 475V AC |
Delay Time: | 0.1 Sec ~ 30 Sec |
Voltage - Supply: | 380 ~ 415VAC |
Output Type: | Relay |
Circuit: | SPDT (1 Form C) x 2 |
Contact Rating @ Voltage: | 5A @ 250VAC |
Mounting Type: | Socketable |
Operating Temperature: | -20°C ~ 60°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The PPC71DM48 is designed for use in the monitoring of current or voltage levels, with a relay output that triggers when the level is reached or exceeded. This type of monitoring is critical to many systems, as it ensures that the current or voltage remains within safe limits, and that any problems are quickly identified and rectified.
In its most basic form, the PPC71DM48 is designed to detect the input level from a 4-20mA or 0-10V DC signal, and then compare that level to a set threshold. If the threshold is reached or exceeded, the PPC71DM48 will trip a relay output, which can be used to trigger further actions, such as sending an alarm or turning off the system. The PPC71DM48 offers both normally closed (NC) and normally open (NO) relay output contacts, so that a wide variety of solutions can be constructed.
The PPC71DM48 is programmed using a simple rotary control on the front panel of the device. The control selects the level at which the relay will be triggered (low current, high current, low voltage, high voltage), and the hysteresis (i.e. the difference between the low and high points at which the relay will be triggered) can be adjusted. The device also has three LEDs to indicate whether the signal is in range, above the upper limit, or below the lower limit.
The PPC71DM48 has a number of applications in a wide range of markets. The most common are in monitoring of current or voltage levels in industrial machinery, robotics, HVAC systems, pumps and other process equipment. In all of these applications, it allows for the monitoring of critical limits, and for control systems to be quickly triggered if any of those limits are breached. This type of monitoring and control helps to ensure that operations run more safely and smoothly, without the risk of premature failure of components.
The PPC71DM48 is a cost-effective and reliable monitoring solution that is suitable for a wide range of applications. Its simple programming, and range of output contacts, make it a prime choice for any installation where critical current or voltage levels need to be monitored and controlled.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PPC71DM48 | Carlo Gavazz... | 0.0 $ | 1000 | 3-PHASE MONITORING RELAY |
PPC7 BK080 | Alpha Wire | 1.03 $ | 1000 | 3-6.5MM STNDRD PLSTC PGCa... |
PPC7 SL080 | Alpha Wire | 1.03 $ | 2171 | 3-6.5MM STNDRD PLSTC PGCa... |
CURRENT SWITCH 5-50A
21-890=WILMAR POWER MONITOR
RELAY CUR SENSE 24VDC 5-5A
REL AC GROUND FAULT SENS 120VAC
3-PHASE OVER/UNDER VOLT RLY
TACH RLY 300 RPM 115V